How do I play Swann security cameras on my iPhone?

Tap the Playback icon. Tap the camera icon. Set a Start and End date and time….Searching recordings

  1. Tap on the recorder below the calendar.
  2. Choose a camera (radio button at the right will be ticked).
  3. Tap on Start playback.

How do I get Swann videos on my iPhone?

How to Set Up the Swann iPhone App

  1. Open the SwannView app, and then tap the “Settings” icon to open the Device Manager screen.
  2. Tap the “Add” button to add a new DVR to the Device Manager list.
  3. Enter a name for the DVR into the Device Name box.
  4. Enter your DVR’s IP address or Dynamic DNS name into the Address box.

How do you watch playback on Swann app?

Tap on Playback – it will show all of today’s recording from all devices paired on your account….Playback recordings

  1. Select specific device or channel of a DVR or NVR.
  2. Set a time frame.
  3. Tap Back to see the results.

Why is my Swann camera not working?

You should check first that your camera power supply (or supplies) are properly connected to a wall socket or power strip. If you do have the power supply connected to a power strip, try a wall socket just in case the power strip is faulty or is a specialised unit that doesn’t have all the sockets active at all times.

Why is my Swann camera offline?

Occasionally, your camera may go offline due to network connectivity. Even if your camera is not too far from your router, there may be different materials (walls, floors, metal, concrete, plaster) that can block the WiFi signal. Minimize the number of physical obstructions between the camera and router.

How do you delete playback on Swann app?

How do I delete video recordings? Tap the “Edit” button (top right) then tap a video to select. To delete the selected videos, tap “Delete” then tap “Confirm”.

What is Error 90 on SwannView plus?

The Swann error code 90 occurs when there’s a problem with the network. The IP cameras are also susceptible to present such a network issue. The solution for the problem is to reboot the router and the recorder, update the firmware and the app, and try to establish the connection again.