How do I log into my HP ProCurve switch?
Log into your ProCurve using SSH or Telnet. Select Run Setup in the menu either by hitting 8 or using the arrow keys then hitting enter. Using the arrow keys, select Logon Default. Hit space to change Logon Default to CLI.
How do I reset my ProCurve switch to factory settings?
To execute the factory default reset on the switch, perform these steps:
- Using pointed objects, simultaneously press both the Reset and Clear buttons on the front of the switch.
- Continue to press the Clear button while releasing the Reset button.
- When the Self Test LED begins to blink, release the Clear button.
How do I clear my HP password?
Open windows Control Panel, in the top right of this window click the dropdown menu for ‘View by’ and select Large Icons. Now click User Accounts, click the Remove password link, enter the current password and then click the ‘Remove Password’ button.
How do I restore my HP 1910 to factory settings?
Restore to factory default configuration….HP V1910-48G JE009A Factory reset – Password recovery capability enabled.
- Connect switch cable to COM.
- Open Putty on COM 38400 – 8 – 1 – N.
- Powercycle the switch.
- Press Ctrl-B at boot to enter extended boot menu.
- Skip current system configuration.
- Reboot.
How do I change the password on my HP 2920?
Press and hold the reset/clear button for 5 to 10 seconds in order to clear any passwords stored on the device.
Is there a default password for HP ProCurve switch 2824?
Re: Default Password HP Procurve Switch 2824. NO default password is set when the switch is new. The default configuration is quit simple: One default Vlan (Vlan1) with IP DHCP enabled on this Vlan, and it has 2 users built in: Manager & Operator with NO password set but you can configure other user names (Optional).
Which is the default password for HP switch?
What HP do not tell you is that once the Swith is configured via the CLI with a new password when you login to the switch via the web interface the default username for the HP 2920-24G is manager.
Is the ProCurve switch 5406zl Open 6 slot?
The Switch 5406zl is available as an open 6-slot chassis (J8697A) and as the Switch 5406zl-48G bundle (J8699A) with two 24-port 10/100/1000-T zl Modules pre-installed. NoteThe open 6-slot chassis (J8697A) does not ship with any power supplies. The switch needs at least one power supply to operate. Figure 1-1. ProCurve Switch 5406zl (J8697A) 1-2
Which is the default username for HP 2920-24g?
What HP do not tell you is that once the Swith is configured via the CLI with a new password when you login to the switch via the web interface the default username for the HP 2920-24G is manager. Hope this helps someone in future.
