How do I fix unable to print 50?
If “Unable to print 50” is displayed again, then unplug the machine from the power outlet for 1 minute, then plug it back again. Remove all the ink cartridges, turn off the printer, turn it upside down and shake it for a few seconds. If “Unable to print 50” is cleared, then do a Print Quality Check Sheet (PQCS).
How do I fix the troubleshooting on my Brother printer?
Follow the Best Troubleshooting Tips for Brother Printer: Try shutting down the printer and restart it if you encounter any problems in between periods. Periodically check the network / USB cable or USB port. Uninstall the old driver and reinstall the latest version of the printer driver.
Why is my Brother printer giving me an error?
Difficulty printing from your PC can occur for various reasons. The most common reason a networked Brother machine may stop printing, is because the connection between the computer and the Brother machine is lost. This can occur as a result of wrong settings or configuration of the printer driver.
How do I fix Print Unable 48?
“Unable to Print 48”
- Using both hands, use the finger holds on each side of the machine to life the scanner cover into the open position.
- Carefully check the left (1) and right (2) hand corners and the center inside the machine and remove any paper scraps that may be jammed.
How do I fix init unable 48?
“Unable to Init. 48”
- Confirm the error message appearing on the display.
- Press Stop/Exit to temporarily clear the error message.
- Unplug the machine from the power outlet.
- Print a User Settings Report to test.
- Your machine will require service.
- Transferring stored faxes to another machine.
What causes brother mfc-665cw unable to print 51 error?
The following article covers a fault found with the Brother MFC665CW that causes an Unable to Print 51 error. After some quick Google research I discovered that no one seemed to have an idea of what causes this fault and a number of forums claiming that a purge counter reset would fix it.
How to reset purge counter on iFixit printer?
– Press “2783” in order to reset the purge counter. You will see: “purge:0000” – Press the “Stop” button. – Press “99” to exit the maintenance mode. This may or may not work but it’s worth a shot. Was this answer helpful?
What kind of ink does a brother printer take?
This is likely to be similar to other Brother printer models that take the LC57 ink cartridge (DCP130C, DCP330C, DCP350C, DCP540CN, DCP560CN, MFC240C, MFC440C, MFC465CN, MFC5860CN, MFC685CW, MFC885CW).
