How are socket sizes measured?

In the current market, socket sizes are divided into two systems: SAE (imperial, measured in inches) and metric (measured in millimeters). Both 6-point and 12-point sockets are measured using these two systems. SAE is used primarily in the United States and metric is used primarily in Europe and Asia.

What is a 3/8 drive?

A 3/8″ drive can drive sockets of all sizes. It is big enough to apply quite a lot of force, but not too big to fit into tight spaces. 1/2 inch – 1/2″ sockets are generally used for nuts and bolts from around 10mm and up.

What are standard socket sizes?

There are four common socket sizes: 1/4 inch (0.6 centimeters), 3/8 inch (0.9 centimeters), 1/2 inch (1.3 centimeters) and 3/4 inch (1.9 centimeters). In-between sizes are available too, starting with 1/4 inch (0.6 centimeters) and increasing every sixteenth of an inch (0.16 centimeters).

How deep are deep well sockets?

A deep socket will generally be around one inch long. This will allow you to use a socket wrench in inaccessible places, especially if you have an extension on the driver.

What is a 3/8 socket in MM?

Standard / Metric Wrench Conversion Chart

What is the next size up from a 3/8 socket?

Six Point Standard Sockets (3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1)

What sizes are in a 3/8 socket set?

SAE to Metric Conversion Chart

Is a 3/8 socket the same as a 10mm?

So what is a 10mm socket equivalent? The equivalent imperial size of a 10mm socket is a 3/8 socket. Imperial sizes are known as SAE (Society of Automotive Engineers) or Standard.

How wide is a 3/8 socket?

SAE to Metric Conversion Chart

What is the diameter of a 3/8 socket?

Impact 3/8″ Drive Deep Well Sockets Features:

What is a 3/8 wrench in metric?

Standard / Metric Wrench Conversion Chart

What is the standard socket sizes?

Standard Socket Sizes 1/4 inch drive (0.6 centimeters)- Works with 4mm to ( 4.5 mm, 5mm, 5.5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 3/8 inch drive (0.9 centimeters) – Works with 5.5 mm to 22 mm sockets. 1/2 inch drive (1.3 centimeters): Works with 8 mm to 30 mm sockets. 3/4 inch drive (1.9 centimeters)- Works with 36 mm to 80 mm sockets.

What is the Order of the socket sizes?

If you choose a socket that is too large, you could damage the tool and your hands. Therefore, it’s important to choose the precise socket size that fits the particular fastener. There are four common socket sizes: 1/4 inch (0.6 centimeters), 3/8 inch (0.9 centimeters), 1/2 inch (1.3 centimeters) and 3/4 inch (1.9 centimeters).

What is standard socket depth?

You’ll find that the sockets, both deep and standard, have either 6 points or 12 points, although you can also buy 8 point sockets which work well with square bolts. A deep socket will generally be around 1 inch long.

What size socket for oil filter?

The fuel filter cap down on the frame rail uses the same size socket as the oil filter cap… 36mm The one up top is 24mm or a 1/2″ extension will also work