Do Drywall Sanding sponges work?

Sanding Drywall with a Sponge Most can accommodate wet or dry sanding and are great for getting into tight corners and ceilings. When using a sponge, a wet sanding method is typically most effective: Fully submerge the sponge in water and squeeze out the excess.

Are Sanding sponges any good?

Sanding sponges are particularly good for getting into the crevices associated with fine trim and crown molding. You can apply extra pressure to make the sponge conform to the irregular surfaces.

What Grit is a drywall sanding sponge?

Once thoroughly dry, use a 100 or 120 grit sandpaper, 150 or 220 grit sand screen or Fine sanding sponge to smooth out the joint compound. Pay special attention to properly sand and smooth the outer edge of the joint compound so that it blends with the existing wall.

Is it better to sand or sponge joint compound?

However, sanding drywall provides a smooth finish even when the compound has a lot of bumps and grooves. Using the sponge method is most effective when you have a relatively smooth surface to work on. The sponge method doesn’t work on quick-setting joint compounds.

What is a fine sanding sponge?

3M Sanding Sponges are designed for sanding wood, paint, metal, plastic or drywall. This sponge features conventional 3M abrasives and is made with durable, flexible foam. The block shape makes it easy to hold and sands flat, contoured, or irregular surfaces.

Can 3M Sanding sponges be washed?

The biggest advantage of using a sanding sponge is that it can be washed to remove the clogged material. This makes it very long lasting. Cleaning the sponge is easy and should be done after each use.

What is the best sandpaper for sanding drywall?

It’s tempting to buy 80-grit paper to speed up the sanding job. But because modern lightweight joint compound is so soft, you don’t need heavy-grit paper to sand it. Coarse-grit paper or sanding screens will leave undesirable sanding marks. We recommend 120-grit or 150-grit paper for the best results.

What kind of sander is best for drywall?

A dedicated dustless drywall sander is the best for drywall sanding work since they are equipped with dust collecting system and extension poles. However depending on the type of your work a belt sander, orbital sander or even a hand sander may be a better choice.

How do pros sand drywall?

Wet Sanding Drywall Tips Rub the coarse side against the drywall in a circular motion, making sure to work it into the edges so all areas are smooth. Continue rubbing until the area softens to an even surface. If the sponge begins to dry out, submerge it again and repeat as needed.