Can you run two Humminbird fish finders off one transducer?

Registered. You CAN run two Fish finders on Different Frequency’s, you will not be able to run both at 200kHz one must be 83 or 50 kHz. Depending on what brand of fish finder you will run , some will allow two or more monitors linked to just one transducer using a Nema 2000 backbone.

What gauge wire is the Humminbird power cable?

For a 15-20′ run of cable, we recommend 12-14 gauge, tinned copper stranded wire. Some models (ION, ONIX or HELIX 12) may require a 10 gauge, tinned copper stranded wire.

Do you need an inline fuse for fishfinder?

No. There’s no need for a fuse with that little battery.

What kind of sonar does a Humminbird 788ci have?

It is packed with power and features that make it a fishfinder for the more serious boat angler. As well as having standard dual beam sonar coverage at 200 kHz (25°) and 455 kHz (16°) the 788ci features the more powerful down imaging sonar.

How to contact the Humminbird Customer Resource Center?

Contact our Customer Resource Center at either 1-800-633-1468or visit our web site at www.humminbird.com. WARNING! This device should not be used as a navigational aid to prevent collision, grounding, boat damage, or personal injury. When the boat is moving, water depth may change too quickly to allow time for you to react.

What does MAX mode on Humminbird 788ci do?

Humminbird have created a feature called switchfire sonar on the Humminbird 788ci that is basically a filter. Max Mode shows all returns in full detail, including thermoclines and currents. The Clear Mode is the filtered view which can be used in rough water.

Where are the screenshots stored on the Humminbird 788ci?

The Humminbird 788ci also has the facility to record screenshots and the moving sonar pictures on the fishfinder for reviewing later, which again can be stored via the dual SD card slots.