Can k13 be painted?

Yes. All of ICC’s products come in standard and custom colors, however, the cost increases when specifying custom colors. Can the installed material be painted? Yes, BUT, please consult International Cellulose Corporation for the correct practices or the benefits of our products can be compromised.

Can you paint K-13 insulation?

K-13 is available in 7 Standard Colors, but can be custom matched to any color to fit your design requirements. To change the color, click the color swatch. To go full-screen, click the photo.

What is k-13 in construction?

K-13 thermal insulation is a spray-applied thermal and acoustical insulation typically used as an exposed ceiling spray insulation, requiring no additional barriers or materials.

What is K13 spray?

K-13 is a spray-applied thermal and acoustical insulation typically used as an exposed ceiling finish requiring no additional barriers or materials. K-13 meets project requirements for thermal insulation, noise control with an attractive natural texture that is available in standard and custom colors.

What is SonaSpray?

SonaSpray “fc” is a spray applied acoustical texture designed for a wide range of project types. SonaSpray “fc” provides an attractive, high performance solution to acoustical and lighting design objectives in both new construction and renovation projects. Specially matched colors are also available as a design option.

What is DC315?

DC315 is a single component, water based intumescent coating tested to meet Building Code requirements for the fire protection of for Spray Polyurethane Foam (SPF). The Choice is clear, DC315 is the most tested and approved fire protective coating for SPF insulation on the market today!

Can you paint SonaSpray?

This provides even greater bond and compressive strength without reducing the acoustical performance. SonaSpray “fc” can be painted with water based latex or acrylic paint if desired, without appreciably reducing the NRC value.

Can Sonaspray be painted?

How much does it cost to soundproof a room per square foot?

The total cost of soundproofing an existing house ranges from $10 to $30 per square foot. The most significant material costs include mass-loaded vinyl for the floor and acoustic panels for the other surfaces.

Is DC315 a thermal barrier?

DC315 Fireproof Paint is a fully tested and approved intumescent coating to meet 15 minute Thermal Barrier and Ignition Barrier protection over Spray Polyurethane Foam (SPF). DC315 has also been tested as an ignition barrier under AC 377 Appendix X.

Does spray foam block sound?

Spray foam is known as one of the best types of insulation to install to reduce noise. Spray foam will do that while blocking out noise from outside or other rooms. Unlike standard fiberglass insulation, spray foam expands completely into every crevice of the interior of a wall, blocking out all unwanted sounds.

How does K-13 insulation reduce air infiltration?

K-13 insulates by creating dead air spaces between and within its hollow fibers. Because K-13 fibers are sprayed-in-place, the material fills cracks, seams, and voids, forming a monolithic coating over the substrate reducing air infiltration. Unlike prefabricated insulations, K-13 has no voids or compressed areas to reduce thermal efficiency.

What is the are value of K-13 insulation?

Unlike prefabricated insulations, K-13 has no voids or compressed areas to reduce thermal efficiency, resulting in exceptionally low heat-loss characteristics and an R-Value of 3.75 per inch.

How is K-13 used to reduce heat loss?

K-13 is sprayed-in-place, filling cracks, seams, and voids to form a monolithic coating over the substrate helping to reduce air infiltration. Unlike prefabricated insulations, K-13 has no voids or compressed areas to reduce thermal efficiency, resulting in exceptionally low heat-loss characteristics and an R-Value of 3.75 per inch.

What’s the are value of K13 sound absorption spray?

Unlike prefabricated insulations, K-13 has no voids or compressed areas to reduce thermal efficiency, resulting in exceptionally low heat-loss characteristics and an R-Value of 3.75 per inch. K-13 can be sprayed up to 5″ thick in one application without mechanical support.