Are vertical HF antennas any good?
Vertical antennas are compact in size and provide amazing reception for the size. While horizontal antennas deliver greater reception overall, they also take up a lot of space. Especially for beginners or amateur hobbyists, having such space might just not be possible.
Who makes cushcraft antennas?
MFJ Enterprises Inc
Cushcraft | MFJ Enterprises Inc.
Should I use radials for the diamond bb7v?
If its mounted above ground like on a roof then at least four tuned radials per band will be beneficial. If its on the ground then tuned radials get detuned and ground losses creep in, so its much better to saturate the area around the antenna with lots of short radials like 20 or 30 radials 20 or 30ft long each.
Is dipole better than vertical?
If cost is your primary consideration, the horizontal dipole is a great choice. All you need is wire, insulators, and some support rope to build this simple antenna. Vertical antennas naturally have a low angle of radiation, meaning you’ll have a good chance of making worldwide contacts.
Do trees interfere with HF antennas?
Trees have little attenuation on HF, and many booming signals on the HF bands come from stations who have antennas in and below tree canopy level. They do start to matter more on VHF, and even more on UHF.
What kind of antenna is needed for ham radio?
Wire antenna is the most common type of antenna used in ham radios. People are drawn towards them more than the others since it comes at very affordable price points and is easier to install than others. Besides, its structure is so simple that you can easily make one at home!
Where are cushcraft antennas made?
Manchester, New Hampshire
According to MFJ, Cushcraft — makers of HF/VHF/UHF vertical, beam and Yagi antennas for the Amateur Radio community — will continue to be manufactured in Manchester, New Hampshire.
Who makes Comet antennas?
NatCommGroup is the North American Distributor for COMET and MALDOL brand antenna products designed, manufactured and quality controlled in Japan. We are also the distributor of DAIWA brand RF SWR/power meters and switching power supplies and we sell some Creative Design (Create) antennas (Made in Japan).
Should a dipole antenna be vertical or horizontal?
You need to have a vertically polarized antenna for it to be effective. If you have repeaters (or other simplex) stations you’d like to work in all directions, then a good vertical omnidirectional antenna is the best bet.
Do trees absorb RF?
Trees do absorb some RF energy. So do buildings, hills, and other structures. There are very few cases where higher isn’t better for antennas.
How many bands does the Cushcraft R9 vertical antenna cover?
Cushcraft R9 Nine-Band Vertical Antennas provide coverage encompassing the 80, 40, 30, 20, 17, 15, 12, 10, and 6-meter bands. Cushcraft achieved a major breakthrough in the development of an HF multi-band vertical antenna that has been specifically designed for use with a tuner and amplifier.
Is the Cushcraft HF beam antenna valid in the US?
Valid on orders shipped in the contiguous United States. Cushcraft HF Beam Antennas are high quality mono-band and multi-band directional antennas. They represent a long histor… Cushcraft 70cm SSB/CW Yagi beam antennas are the perfect choice for your SSB/CW needs.
Can a vertical antenna be used in a ham shack?
Cushcraft achieved a major breakthrough in the development of an HF multi-band vertical antenna that has been specifically designed for use with a tuner and amplifier. As a result, the antenna more accurately addresses the needs of the contemporary ham shack.
Are there any Cushcraft FM Ringo vertical antennas?
Cushcraft 6M/2M/70cm Multi-Band Beam Antennas are designed to provide hobbyists who have limited tow… Order this product and get free delivery and handling on your entire order! Offer excludes truck freight fees. Valid on orders shipped in the contiguous United States. Cushcraft FM Ringo vertical antennas are the original W1BX.
