Are spline lug nuts any good?

The precision fit and efficient drive angle of the splines provide greater contact area and greater torquing power where you need it during installation and removal. In fact, there is 59% more positive engagement over socket style lug nuts, even with no stud intrusion into drive tool area.

What size are spline lug nuts?

If you have a few sockets in your tool box, try this. To our knowledge, there are only two sizes of 6-Spline nuts (with symmetrical or evenly spaced splines). If your 17mm, 18mm, 19mm, 11/16″ or 3/4″ socket (either Hex or 12-point) fits over your 6-Spline Nut, then you need the Small 6-Spline Key.

What is the difference between spline and hex lug nuts?

splines are usually narrower, and will fit more aftermarket wheels where there might not be enough width in the hole to fit a big socket over the hex lug. also, since you mentioned black lugs.

Is it OK to lubricate lug nuts?

But experts tell us not to use any lubricant, including anti-seize compound, on wheel studs or nuts. The tech folks at Tire Rack state: “Torque specifications are for dry threads only. The fastener threads should be free of oil, dirt, grit, corrosion, etc. It is important NOT to lubricate hardware threads or seats.

What are spline lug nuts used for?

These lug nuts are the perfect addition to your new wheels. The ultra-thin spline drive design is ideal for small diameter lug holes found on aftermarket wheels. They feature a closed end design, more gripping power, a larger seating surface and extended stud engagement.

Can I use aftermarket lug nuts on stock wheels?

Aftermarket lug nuts are made for every type of wheel available. As long as you get the proper lug nuts there is no safety issue. The problem comes when you try to use the incorrect lug nut on any type of wheel, aftermarket or OEM. As long as it’s a good quality part of the correct type than you will be fine.

How do I find my locking wheel nut code?

Each key comes with a code so you can order a replacement from the vehicle manufacturer. The only place to find this code is on the locking wheel nut storage box or plastic storage bag – which is a problem if that’s missing too!

Can you put lug nuts on backwards?

the lugs that came on the stock 2000 v6 wheels can be put on backwards but you can clearly see the difference. One side is flat like a normal bolt and the other side tapers in.

Can you spray wd40 on lug nuts?

WD-40 should not be used on lug nuts whether to try to remove them or to clean off rust. By applying oil, grease, or an anti-seize preparation to the threads, you run the risk of over-torquing them when you tighten up your wheels. WD-40 tends to be more of a band-aid fix than anything.

Should you put anti seize on wheel nuts?

Vehicle manufacturers don’t give torque specifications for wet torque. Anti seize containers say they can be used on threaded fasteners, but almost never say to use them on lug nuts and studs because of serious liability.