Are all K24 blocks the same?

the block doesn’t matter, they are all the same for the most part. The Accord does have fitment issues so you would have have to change the rods and pistons but the others you can just bolt the head on and go.

Why put a K20 head on a K24 block?

The second configuration, found on the K24 (Element, CR-V, Accord) and the K20A3 (base RSX, Civic Si), is designed to minimize emissions and maximize driveability and gas mileage. In this system, there are two cam lobes, a normal one and a dinky one, for each pair of intake valves (nothing happens to the exhaust side).

Are K20 and K24 diffs the same?

Rather obviously, the big difference between these two engines is the displacement, with the K20 as a 2 liter and the K24 as a 2.4 liter. To give the K24 an extra 400cc of displacement compared to the K20, Honda increased bore to 87mm and stroke to 99mm.

How much power can a K24A2 hold?

stocks sleeves will hold up to 700hp.

How much horsepower does a K24A2 have?

At about 1,000 miles the stock K24A2 put out 184 hp and 165 lb-ft of torque.

Which is better a K24A2 or k24z3 engine?

The major advantage to our original K24A2 swap is the naturally aspirated power potential. A K24Z3 engine is a very solid option for 200-210whp, but in order to make much more power, a K20 head (or K24A2 head) needs to be swapped on, which comes with its own share of complications.

What kind of subframe does a K24A2 use?

Our original K24A2 swap uses an aftermarket tubular subframe to provide adequate clearance for a true 4-2-1 style race header. Fitting proper length primary and secondary runners and merge collectors takes up space, and the tubular subframe gives us the space we need.

What makes the Honda K24 engine so good?

In fact, cars equipped with these engines can easily reach six digits on the odometer, surpassing other brands for reliability and performance. In comparison to other Honda engines, the K24 stands out for its better exhaust flow, increased air intake flow, fortified connecting rods, and an updated crankshaft with additional counterbalanced weight.

Can a k24a3 engine be used for swaps?

Previously, K24A3 engines couldn’t be easily used for swaps thanks to the completely different wiring harness and ECU, a drive by wire throttle body, and the required flash based tuning.