What is meant by pitch of rivet and gauge line?
Answer: Pitch is the distance between two consecutive rivits measured paraller to the direction of force. While gauge is measured perpendicular to the direction of the force.
What is the other name for pitch in rivets?
The staggered pitch is also known as alternate pitch or reeled pitch. The staggered pitch is defined as the distance measured along one rivet line from the centre of a rivet on it to the centre of the adjoining rivet on the adjacent parallel rivet line.
What is diagonal pitch in riveting?
: the distance between the center of a rivet in one row and that of the nearest rivet in the next row in riveted joints having two or more rows of staggered rivets.
What is the recommended rivet pitch?
When new sections are to be added, the edge distance measured from the center of the rivet should never be less than 2 times the diameter of the shank; the distance between rivets or pitch should be at least 3 times the diameter; and the distance between rivet rows should never be less than 21⁄2 times the diameter.
What is pitch in riveted joint?
Few parameters, which are required to specify arrangement of rivets in a riveted joint are as follows: a) Pitch: This is the distance between two centers of the consecutive rivets in a single row. (usual symbol p) b) Back Pitch: This is the shortest distance between two successive rows in a multiple riveted joint.
How are rivet pitch and gauge measured?
Rivet spacing, also referred as rivet pitch, is the distance between the rivets in the same row, and is measured from the rivet center to the rivet center. Transverse pitch is the distance between the rows of rivets, and is measured from the rivet center to rivet center.
What is a rivet line?
Noun. 1. rivet line – a line of rivets at a seam; “the fuselage cracked along the rivet line” line – a formation of people or things one beside another; “the line of soldiers advanced with their bayonets fixed”; “they were arrayed in line of battle”; “the cast stood in line for the curtain call”
What is back pitch in rivets?
The center distance between two adjacent rows of rivets is defined as back pitch. It is denoted by pb and is shown in Figures 3.4(d) and (e). Diagonal Pitch. The smallest distance between centres of two rivet holes in adjacent rows of a zig-zag riveted joint is called diagonal pitch.
What is marginal pitch?
d) Margin or marginal pitch: This is the distance between the centre of the rivet hole to the nearest edge of the plate.
What is pitch in rivet Joint?
What is rivet layout?
How is the transverse pitch of a rivet measured?
Transverse pitch is the distance between the rows of rivets, and is measured from the rivet center to rivet center. Edge distance is the distance from the center of the rivet to the edge of the material being riveted. Figure 13-43.-Rivet length.
What is the area of a rivet hole?
It is the diameter of the unheated rivet. It is nothing but the diameter of the rivet hole itself. It is the area calculated based on the gross diameter of the rivet. It is the distance between centres of two adjacent rivets in a row. It is measured parallel to the direction of force.
Which is the correct definition of the word rivet?
riveted; riveting; rivets. Definition of rivet (Entry 2 of 2) transitive verb. 1 : to fasten with or as if with rivets. 2 : to upset the end or point of (something, such as a metallic pin, rod, or bolt) by beating or pressing so as to form a head.
What is the distance between two rivets in a row?
It is the distance between centres of two adjacent rivets in a row. It is measured parallel to the direction of force. It is the distance between two adjacent rows of rivets measure perpendicular to the direction of force. It is the line of rivets which is parallel to the direction of force.
