How do I connect my phantom 3 standard?
Setting up the drone with the DJI GO App
- Power up your transmitter and then power up your drone.
- The following screen will appear.
- Attach the lightning cable from the transmitter to your iOS device.
- You will now need to activate the Phantom 3.
- Choose a name for the aircraft, then tap the “Continue>” button.
How do I connect my phantom 3 to WIFI?
How do I connect to the Wi-Fi video downlink?
- Switch on the remote controller.
- Turn on the aircraft.
- On your mobile device, select “PHANTOM3_XXXXXX”“from your Wi-Fi network list, and enter the default password “12341234”.
- Launch the DJI GO app and enter Camera View.
How do I connect my phone to my phantom 3?
- Step 1: download the DJI app. To operate the drone with your smartphone, you need the DJI Fly app.
- Step 2: open the DJI Fly app. If you’re using the app for the first time, it will probably ask you to register.
- Step 3: connect to the remote.
- Step 4: turn on the drone.
- Step 5: connection has been made.
How do I connect my drone to my controller?
Launch the operating app for the drone, tap enter device, then camera view, and select the remote control settings to link. Press and hold the function button, then release it. The drone will beep, and when the linking is successful, both the drone and the controller will produce a green light.
Why does my phantom 3 say disconnected?
Sometimes, you are ready to fly but the DJI GO and GO 4 apps state that your drone is “Disconnected”. DJI GO connection issues can be caused by faulty USB cables, the remote controller’s signal connection, device compatibility and a few other reasons.
How do I reset my DJI Phantom 3 standard controller?
If you want to reset wifi, please turn on the remote controller and then turn the gimbal dial to the far right, toggle the S2 switch back and forth for at least three times. You will hear a beep if it reset successfully.
How do I pair my DJI remote?
Press and hold the flight pause button, function button and customizable button simultaneously. Release the buttons when the remote controller makes a beeping sound. Then the remote controller starts the linking process. Ensure the remote controller is within 20cm (0.66ft) of the aircraft during linking.
How do I reset the WiFi on my DJI Phantom 3 standard?
How can I link my Phantom 3 to my DJI Go?
Take the Phantom 3 Standard as an example. Connect the mobile device to the remote controller’s Wi-Fi network. Launch DJI Go. Enter camera view, go to remote controller settings. Click linking remote controller. The remote controller will make a beeping sound indicating that it is ready to link.
How do you connect a remote controller to a Phantom 3?
Find the hole near the aircraft’s landing gears, use a pen or other tool to press and hold the link button for 2 seconds. The remote controller will stop making sounds and the indicator light will turn solid green. Select OK when the app shows a notification indicating the RC linking is successful.
What does the Link light on the Phantom mean?
The link status light behind it will be red if the Phantom isn’t connected to a radio, and the rear LEDs on the Phantom’s arms will be blinking yellow. If the link status light is green, it means that the Phantom is currently connected to a remote controller.
How do I connect my iPad to my DJI remote?
Plug the iPad to the remote controller using a Lightning cable and launch the DJI Pilot app 4. Turn the remote controller on. DJI Pilot might ask you whether you trust the USB connection. If it does, indicate that you do. You will see the following screen once the remote controller is on. Note the red box w i th “No signal” at the top.
