How long is a John Deere 24 row planter?
Call Us
| Key Specs: | |
|---|---|
| Transport length | 10425 mm 410.4 in. |
| Transport height | 4075 mm 160.4 in. |
| Field operation width | 13212 mm 520.2 in. |
| Field operation length | 7913 mm 311.5 in. |
How much does a 24 row John Deere planter cost?
24 rows, 30 inches – $199,900 to $249,000. 36 rows, 20 inches –$229,900 to $258,000.
How many rows is a DB 90 planter?
36 row
Pro-Shaft drive RowCommand planters
| Planter model | Row configuration |
|---|---|
| DB 60 | 47 row, 38.1 cm (15 in.) |
| DB 80 | 32 row, 76.2 cm (30 in.) or 48 row |
| DB 90 | 36 row, 76.2 cm (30 in.) |
| DB 120 | 48 row, 76.2 cm (30 in.) |
How many rows does a planter have?
Planter size Blunier says most buyers are looking to upsize to cover additional acres within the same 10-day window typically available in the spring to plant corn. Sizes today range anywhere from 6 to 48 rows. “A good rule of thumb when sizing is to assume each row can cover 100 acres per season,” Blunier says.
How much horsepower does it take to pull a 24 row planter?
Pulling a 24-row planter, “we need a 310-horsepower tractor at 7 to 7 1/2 mph.
How much does a John Deere 48 row planter cost?
Retail price is $345,000, according to Rippchen. It’s interesting to track the rate of planter size increases from Deere.
How much horsepower does it take to pull a 36 row planter?
250hp will do it. We pulled one with a 1999 Cat 55 wide gauge for 7 years, but was running out of cooling capacity for the hydraulics after installing e-sets. We have rawson drives and running vacuum up around the 19″ mark put a lot of strain on the system on a warm day.
How many acres can you plant with a 24-row planter?
Typical planting rates are 20-25 acres per hour for 16-row planter and 35 acres with a 24-row planter.
What is a row planter?
A planter is a farm implement, usually towed behind a tractor, that sows (plants) seeds in rows throughout a field. Such larger and newer planters comprise multiple modules called row units. The row units are spaced evenly along the planter at intervals that vary widely by crop and locale.
How much HP do you need for no till drill?
Transporting Drill The JD 1590 No-Till Drill weighs approximately 7,500 lbs. Movement of the drill requires a tractor or truck equipped with a hitch with adequate towing capacity. Manufacturer recommends a minimum 85 PTO horsepower tractor.
How much horsepower does it take to pull a 20 foot disc?
Subject: RE: Typical Hp requirements for a 20 foot disk? 150 is plenty. 120 would even do it.
When did John Deere introduce the maxemerge planter?
It’s been more than 30 years since John Deere introduced the MaxEmerge Planter to help growers place seed at the proper depth and row spacing under tough field conditions. So you would expect the new generation of MaxEmerge planters to be something special.
How big is a John Deere 8 row planter?
John Deere 7300 8 row 30” planter. JD trash whippers V-Closing. Big painter fiberglass boxes. 250 monitor. Liquid fertilizer with ground drive pump. Needs one gauge wheel tire. May need a couple of depth wheel tires. Nice planter for its age.
What kind of planter does John Deere 7300 have?
#8703 John Deere 7300 Max Emerge II Planter, 20’W, 8 row unit, 30″ row spacing, Individual seed hoppers, Seed box extensions, Vacuum metering, Ground meter drive, Spring down pressure, Row cleaners, Single disk openers, Mixed rubber wheel & spiked closing system, Three point hitch, (2) 7.60-15 dr…
How big is a John Deere 6RN conservation planter?
John Deere 7200 6RN conservation planter, No-Till, Liquid fertilizer, Vacuum meters. 14900.00. Still on the farm, so please contact 74o-6o5-1987 for more information. 8 row, 36″ spacing, could easily be made a 6 row. Nice clean well maintained JD 6 row 30″ 7200 planter.
