How much does it cost to get a rug professionally cleaned?

The average cost to clean your area rug ranges between $50 and $300 or $75 to $150 average for a typical rug between 4 by 8 and 6 by 10 feet. Rug cleaning prices fall between $1.25 and $8 per square foot. Where on that range you fall depends on the scrubbing method and type of material.

Can you take a rug to the dry cleaners?

Rug dry cleaning can be successful if your rug is only lightly soiled or marked. You cannot take your rug down to any local dry cleaner. If your rug is more than a little marked, dirty, or soiled, it is best to bring your rug to a professional rug cleaning service instead.

How much does it cost to rent a rug cleaning machine?

With Rug Doctor, you can rent a machine from a partner location (Home Depot or Walmart, for example) for about $30 a day. The cleaning solution costs about $17 for 48 ounces; you’ll need three bottles for 1,600 square feet of carpet. Pretreating solution starts at $6 each.

How much does it cost to clean a 8×10 rug?

Area Rug Cleaning Cost

Size (ft) Steam / Dry Clean Hand Wash
4×6 $35 – $120 $75 – $200
5×8 $60 – $200 $120 – $320
6×9 $75 – $250 $150 – $400
8×10 $120 – $400 $240 – $640

How much does it cost to carpet a 3 bed house?

Majority of Carpet cleaning companies in London tend to charge based on either per square footage or per room, with most commercial carpet cleaning services charge per square foot. On the average three-bedroom house, you will expect to pay between £45-£50 per room or £130-£200 for the whole house .

Can you pressure wash a rug?

Rugs can be a great way to brighten up the décor in your home. If your area rug is looking less than its spectacular self, it’s time for a proper clean with a pressure washer. With the help of a pressure washer, you’ll get your rug sparkling clean and looking. brand new.

Can I use a carpet shampooer on an area rug?

Carpet cleaners cannot clean area rugs with pet stains, fluid stains, paint stains or a thick coating of dirt on them. However, if the rug is not stained and is made up totally of synthetic fiber, then you can clean the area rug with carpet cleaners. They may weaken the structural strength of the fiber.

How do you clean an area rug yourself?

  1. Remove loose dirt with a vacuum.
  2. Test the cleaner on your rug for colorfastness.
  3. Work the cleaner into the rug and let it sit for several minutes.
  4. Hose off the rug.
  5. Use a squeegee to remove excess water.
  6. Allow both sides of the rug to dry out completely.
  7. Vacuum or brush the rug to loosen compacted fibers.

How much is it to rent a carpet cleaner at Ace Hardware?

We carry both large carpet cleaners for whole house jobs and smaller units for spot treatment. Rentals start at $29.99 and will save you over $200 over a professional cleaning service.