What is a Buffalo AirStation?
Buffalo AirStation is the name given to a series of wireless LAN equipment sold by Buffalo Technology.
What is Buffalo Router?
Buffalo’s AirStation HighPower N300 Open Source DD-WRT Wireless Router is a fast wireless solution, ideal for creating a high speed wireless home network and comes with DD-WRT pre-installed with a breadth of powerful features not normally found in similar routers.
How do I connect to Buffalo AirStation?
Connect the AirStation to the PC and power both devices on. Launch a web browser and enter the AirStation’s IP address into the address bar. If you do not know the AirStation’s IP address, check the setup card included in your AirStation’s package, or use AirStation Configuration Tool to display it. Log in to Settings.
How do I open Buffalo AirStation?
Select [Start] – [All Programs] – [BUFFALO] – [AirStation Utility] – [BUFFALO AirStation Configuration Tool]. Click [Next]. Select the AirStation that you want to configure, then click [Next]. Enter the username and password, then click [OK].
How do I reset my Buffalo AirStation router?
How to Hard Reset a Buffalo Router
- Press and hold the reset button at the back of the Buffalo router for 30 seconds.
- Disconnect the power from the router while continuing to hold down the reset button.
- Reconnect the power after five seconds.
Are Buffalo routers good?
Buffalo’s router turned in a good performance as a 5GHz 802.11n router, at least at close range. It took a strong first-place finish when the client was 9 feet from the router with no walls separating the two. Here again, however, its performance dropped off rapidly with distance.
How do I configure my Buffalo router as a repeater?
To configure the AirStation’s SSID and security settings, click on the Wireless tab and then the 2.4 GHz (or 5 GHz) subtab. (Optional) To use the AirStation as a repeater instead, simply click the Repeater checkbox on the Wireless Bridge page.
What is Buffalo AirStation default password?
The default username is “admin” and the default password is “password”. Click the “Wireless” tile. Enter a new SSID for the 11n and/or the 11ac network, then click Apply.
What is the IP address for Buffalo AirStation?
192.168.11.1
By default, your AirStation is accessible on your local network at the IP address 192.168. 11.1 with subnet mask 255.255. 255.0.
