Where is Cresline PVC pipe made?
Our latest state-of-the-art pipe manufacturing facility was constructed in Chehalis, Washington in 2002 and operates as Cresline-Northwest, LLC.
What is Cresline pipe?
Cresline PVC Drain, Waste, and Vent (DWV) Pipe is produced using PVC 1120 polyvinyl chloride material to meet or exceed ASTM D2665 & D1785 standards. PVC DWV is dual-marked for Pressure and Drain, Waste and Vent applications, and is NSF-approved for drain, waste and vent use and NSF-PW.
Who owns Cresline plastic pipe?
Richard A. Schroeder
Richard A. Schroeder is president and CEO of Cresline Plastic Pipe Co., Inc., a privately-held company headquartered in Evansville, Indiana. Cresline is the oldest plastic pipe company in the United States and is recognized as a pioneer in its industry.
What is SDR 21 PVC pipe used for?
SDR-21 PVC solvent weld pressure pipes are suitable for potable water supply lines, transmission mains, sewage force mains, golf course, and other irrigation systems, oilfield saltwater disposal, stormwater disposal, well casings, industrial process piping, and other pressure applications.
What size is PVC 1120?
Manufactured by Northern Pipe Products, Inc. Potable watermain and low pressure sewer pipe, PVC 1120 material per ASTM D2241 and per ASTM D1784, model SDR-21 (CL200), sizes 38 mm (1 1/2″) – 300 mm (12″), integral bell coupler, gasket system per ASTM F477, 6.1 m (20 ft) lay lengths.
What is pvc1120?
Cresline PVC Schedule 80 Pressure Pipe is produced using PVC 1120 polyvinyl chloride material to meet or exceed ASTM D1785 standards and is NSF-approved for drinking water use. Schedule 80 pipe is gray in color and is available in plain end. Typical applications for Cresline PVC Pressure Pipe include: Submersible pumps.
Is PE pipe flexible?
Polyethylene tubing is a flexible, lightweight and highly durable substance used across many industries. It is safe to use with a wide variety of chemicals, gases, fluids and materials.
What SDR is Schedule 40 PVC pipe?
NOTE: 8″ SDR-26 IS DUAL MARKED FOR SCH-40 PIPE.
What is ASTM D1785?
ASTM D1785 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120 is manufactured to meet the needs of a broad range of industrial, commercial and residential piping systems. ASTM D1785 covers pipes made for water distribution and irrigation systems.
What is the difference between SDR 21 and Schedule 40?
40 pipe has a thicker wall thickness than SDR21 pipe. For pipes 2-1/2″ and smaller, it is over 150% thicker.
What is SDR in PVC pipe?
July 6, 2021. The standard dimension ratio (SDR)—also referred to as the standard dimensional ratio—is a measurement and method often used by pipe manufacturers to rate the working pressure capacity of a pipe. It is calculated by determining the relationship of the pipe’s outside diameter to its minimum wall thickness.
