Why does my LG dryer keep saying check filter?
A lint blockage causes your LG dryer lint filter to fail to collect lint in the vents and hoses. Clean them out to solve this problem. A filter error(F0) can be solved by inserting the filter properly or buying a replacement part. The check filter light is meant to turn on before a drying cycle.
How do I clean the filter on my LG dryer?
It’s important to clean up the lint filter after every load. This can be done easily, by lifting out the filter and cleaning by hand or with a vacuum. If it needs to be cleaned thoroughly, water can be used. Make sure to dry the filter completely before re-inserting back into place.
How do you check a dryer filter?
Test your dryer filter by clearing it of lint, then pouring a small amount of water onto the filter screen. If the water pools up instead of flowing through the screen, wash the screen in warm, soapy water using a brush. Rinse, retest and repeat until the water flows through.
How do you clear the CL code on a LG dryer?
CL (Child / Control Lock) Keep pressing & holding down button until CL indication disappears or LOCK icon turns off on the display panel. Unplugging the dryer & plugging it back in will not reset the LOCK function.
What does filter check mean on my Samsung dryer?
Step 1 of 6 note: If the Filter Check display illuminates, it is an indication that there is an issue with the dryer filter. In most cases, cleaning the Lint Filter will solve the problem. Take the lint filter completely out to clean and discard the lint. After cleaning the lint filter, place it back in the dryer.
How can you tell if your dryer vent is clogged?
How to Know if Your Dryer Vent is Clogged
- Clue #1 – Clothes Take Too Long to Dry.
- Clue #2 – Clothing and/or Outside of Dryer Are Very Hot.
- Clue #3 – Burning Smell Coming from the Dryer.
- Clue #4 – Lint and Debris Buildup Around the Outside Vent.
- Clue #5 – Dryer Due for Service.
Why does my LG dryer smell like it’s burning?
The burning smell from your dryer may be lint buildup or another common problem—such as a failing thermostat, motor, or belt. About a third of those fires are caused by excess lint buildup inside the dryer, so it’s time to investigate. A burning smell from a dryer is cause for alarm but not full-on panic.
Where is the check filter light on a LG gas dryer?
The filter light for your LG gas dryer is located on an LED display on the control panel of the dryer. The light reads “Check Filter” or “Chk Filter” when it illuminates.
Is the check filter light an error code?
The check filter light is not an error light or error code — the light is on the dryer control panel as a reminder. The check filter light can be extinguished by pressing the “Start/Pause” button on the control panel. The check filter warning light is reminder to clean the dryer’s lint filter each time the dryer is used.
Can a LG dryer be used without a lint filter?
LG puts the filter reminder light on dryers to remind owners to clean the filter with every use. The owner’s manual strongly warns against using the dryer without the lint filter installed.
