How does a stucco sprayer work?

The user simply connects the hopper to an air hose and compressor, scoops the shotcrete mix into the hopper and starts to spray through the holes. The Stucco Sprayer is supplied with two sets of jets. The smaller set requires an air compressor that delivers at least 7 cubic feet per minute (cfm) at 90 psi.

Can I spray stucco with Hopper?

Our Stucco Sprayer Hopper Gun can be used for plastering a stucco house, traditional plastering of stuccos such as one coat or three coat stucco or GFRC. It can also be used for applying plaster, hard coat stucco, EIFS, small scale shotcrete, papercrete, earthen mixes and more.

Is there such a thing as spray stucco?

Yes, you can spray stucco on walls instead of hand applying it. You can spray every coat of stucco ranging from base coats to finish coats which includes cement based materials and acrylic/synthetic materials. All types of materials!

How long does it take to spray stucco?

Stucco manufacturers typically call for moist-curing stucco a minimum of 48 hours. There are two widely accepted methods for curing stucco: surface-misting (or fogging) and the double-back method.

What is a stucco sprayer?

Used for spraying grouts, stucco, plaster, concrete and other industrial coatings. Choice of nozzles provides various spray sizes and finishes. The range is from 1/8″ heavy texture to 1″ thick in structural layers. Use with a 5 HP or larger air compressor.

Will a staple gun work on stucco?

If you can push a thumb tack into the stucco without a ton of effort then this staple gun will penetrate exceptionally well. The staples are all the same type but very in length.

Do it yourself spray stucco?

Using a 5-gallon pail, pour four gallons of water into it. Add the stucco in a little at a time until you get the desired consistency, which should be like a thick toothpaste. You can mix it using a stucco paddle attached to a drill or just mix it by hand. When it is smooth, it is ready to be put into the sprayer.

What is spray stucco?

There are several factors that you should look at when deciding to hand spread or spray on the stucco to the walls. The sprayer is basically intended to get the mud “on the wall” when it comes to base coats and can be used as a finish if properly sprayed using a finish material.