How do I manually set my DStv decoder?
Running the installation wizard on the HD decoder
- Press the blue “DStv button”
- Use the right arrow to go to “Settings”
- Scroll down to “Satellite Settings”
- Then choose “Home Network”
- Select “Launch Installation Wizard” then press “OK” on the remote.
- Choose the satellite that matches your country.
How do I set up DStv extra view?
Each decoder needs to receive good DStv signal strength and quality for extra view set up to work. First, connect the coaxial cable of each decoder to the smart LNB….How to check the extra view status on the decoder
- Press the “Help” button on the remote control.
- Scroll to “General Information“
- Then go to “Extra View“
How do I fix extra view decoder?
THE FIX FOR ERROR E143-4
- Re check cable from the primary decoder – Check / try restarting your decoder.
- Check extra view port settings in the decoder settings.
- Check if heart beat is being received in the primary decoder settings.
- check and see if the pairing of the decoders is the same, to work on triple and extra view.
How do I set the frequency on my DStv?
Press MENU on Your DSTV Remote Control
- then Go to ADVANCED OPTIONS – press OK.
- When Prompted, you need to Enter Pin code 9949.
- Go to NETWORK SETUP press OK.
- Home Network Dstv IS20 PLEASE DO NOT CHANGE THE DEFAULT VALUES (Frequency should be 11594 and Symbol rate 27500 )
- Press P+ button on the remote to access new networks.
How do I reset my DStv decoder without the remote?
Process of how to reset DStv decoder without remote First, unplug the power button from your decoder and ensure it is completely turned off. You can check for this by ensuring all its lights are turned off, and none is blinking. Turn it back on and press the reset button on your decoder.
How do I connect my DSTV decoder to my extra TV?
Connect any one of the four cables from the satellite dish directly to the LNB input on the back of the decoder. 1. If you have a HD TV, use the supplied HDMI cable and connect it to the HDMI port (marked 1) on the back of the decoder, then connect the other end to the HDMI port on the TV.
How do I fix DStv without signal?
What to do when your decoder loses signal
- Step 1: Check whether the cables connecting the decoder are in place.
- Step 2: Try rebooting the decoder.
- Step 3: Visually check your dish.
- Step 4: Examine the status of the Low-noise Block downconverter (LNB)
How do I check my DStv signal on my phone?
Search for the Satellite Director application on Android and iOS and install it into your device. Once installed, you will have to allow it to access your location to detect it using GPS and place it on the map more accurately.
How does DStv extra view work?
XtraView is a way to keep the whole family happy. With XtraView, you can link either two or three decoders together under ONE subscription (and only pay a monthly Access Fee for the other decoders). When linking two decoders, you will pay your normal monthly subscription plus ONE Access Fee.
What do you need to know about DStv Extra view?
The ExtraView network is an arrangement of two DStv decoders programmed into a single account and paired up to enable the customer watch two channels simultaneously from two viewing environment while paying a single subscription.
Can a DSTV Explora be added to another decoder?
Yes, your DStv Explora can be added to another one or two decoders in XtraView. Please chat to your local DStv Accredited Installer for more information on available decoder combinations and any changes that may be required to your installation. Please note, there is a second monthly Access Fee required when linking three decoders in XtraView.
What is the DStv smart LNB for extra view?
Dstv Smart LNB is the eye that you see mounted on Dstv Satellite Dish, where the signal cable is connected. It allows newer models of Explora and HD decoders to be connected in Extra View setup without a Heartbeat Cable. In addition, Heartbeat will be sent through the signal cable via the Dstv Smart LNB.
Do you need a second dish for Xtraview?
All you need to access this unique feature is to have multiple compatible decoders and televisions. You will not need a second dish for XtraView. The single view decoders supported by this feature include: DStv HD Single View Decoder 4137 5S/5U – (Stand-Alone)
