What is Vnx in networking?
The first step for this section is to create a 2-port LACP network device. LACP (802.3ad) is a protocol standard that supports load balancing across different physical interfaces and allows multiple ports to be active and passing traffic simultaneously.
What is data mover in Vnx?
A Virtual Data Mover (VDM) is an EMC® VNX™ software feature that enables the grouping of Common Internet File Systems (CIFS) and/or Network File Systems (NFS) environments and servers into virtual containers. VDMs contain the data needed to support one or more CIFS and/or NFS servers and their file systems.
What is VNX storage?
The Dell EMC VNX series of storage systems are a family of systems that provides unified file and block storage. The first generation of VNX replaced the CLARiiON and Celerra product line. The VNX systems provide a wide set of connectivity options for block access and for file access as a NAS system.
What is VNX unified storage?
Description. EMC VNX 5300 Unified Storage System is a high-performance platform for consolidating block storage, file servers, and any direct-attached application storage. The VNX operating environment allows Microsoft Windows, Linux, and UNIX clients to share data in multi-protocol environments (CIFS/NFS).
What is control station in Vnx?
Control Station – CS – Normally preceded by “Primary” or “Secondary” as there are at least 1, but most often 2 control stations per VNX system. It is the job of the control station to handle management of the File or Unified components in a VNX system. Block only VNX arrays do not utilize a control station.
What is Vnx launcher?
What is a VNX Launcher? VNX Launcher is a Unisphere Client for Windows, it is a host-based version of the Unisphere management tool. This version of the Unisphere client includes a browser and self-contained JRE, and does not require Java to be installed.
What kind of data mover does VNX use?
Data Mover is a hardware component of VNX for File. It reads the data from back-end storage by UltraFlex I/O technology to provide the data access. It supports NFS, CIFS and pNFS protocols.
What kind of enclosure do I need for VNX?
• Disk-processor enclosure (DPE)—Shelf in VNX that includes an enclosure, disk modules, storage processors (SPs), two Fibre Channel link control cards (LCCs), two power supplies, and four fan packs. A DPE supports DAEs in addition to its own disk modules.
How does replication failover work in EMC VNX?
The replication failover procedure verifies that the remote VNX Data Mover has matching network interface (s) [same name] as the interface (s) configured on the source VDM. This check is also applied for all interfaces attached to the VDM regardless of which protocol they are bound.
How does a data mover work in a NAS?
Data Mover. A Data Mover is a component that runs its own operating system (OS). This OPS retrieves data from a storage device and makes it available to a network client. It is basically a gateway to present NAS Storage to end-user. The Data Mover can use the NFS, CIFS and pNFS protocols.
