How do I restore my documents in Windows 8?

Restore the Libraries to Windows 8.1

  1. Open File Explorer from the taskbar, that icon-filled strip along the bottom of the desktop. File Explorer appears with its Navigation pane showing along its left edge.
  2. Right-click a blank portion of the Navigation pane and choose Show Libraries from the pop-up menu.

Which command can be used with a missing or damaged boot file in Windows 8?

To do so, follow these steps:

  1. Insert the original installation DVD or USB Drive.
  2. Restart your computer.
  3. Boot from the disc/USB.
  4. At the Install screen, click Repair your computer or press R.
  5. Click Troubleshoot.
  6. Click Command Prompt.
  7. Type these commands: bootrec /FixMbr bootrec /FixBoot bootrec /ScanOs bootrec /RebuildBcd.

How do I find a lost file in Windows 8?

To recover missing files in Windows 8/8.1 using Disk Drill:

  1. Download Disk Drill for Windows.
  2. Open the downloaded file to install it.
  3. Launch Disk Drill and scan your storage device.
  4. Choose which missing files you want to undelete and click the Restore button.
  5. Select the folder where you want to move the recovered files.

How do I boot Windows old?

Even though Windows retains a full copy of your PC’s previous operating system, the system is not set up to use a dual-boot configuration. The operating system that was installed during the upgrade is the PCs only bootable OS. Microsoft does not provide a way to boot the PC from its previous operating system.

How do I fix boot configuration data file is missing Windows 8?

  1. 5 Ways to Fix “The Boot Configuration Data file is missing some required information” Error in Windows.
  2. Reboot from Recovery Drive.
  3. Run “Automatic Repair” on Startup.
  4. Try “bootrec” in Command Prompt.
  5. Restore PC to Factory Settings.
  6. Replace the Failed Hard Drive.

What happens if boot configuration file is missing in Windows 8?

SEE! If the Boot Configuration Data is missing in Windows 8, you cannot boot your computer normally and you’ll see an error message, as shown below. Generally speaking, the BCD is missing error occurs when either of the following conditions is true: 1.

How to fix Boot Manager is missing Windows 7 / 8 / 10?

To fix BOOTMGR is missing errors in Windows 7/8/10, we’ll provide a variety of solutions to help you out. You can try them one by one until the error message disapper and the system start successfully. Solution 2. Check the first boot device Solution 3. Upgrade BIOS version

Why is my BOOTMGR file missing on my computer?

There are several reasons listed below for these BOOTMGR errors. You are trying to boot computer from the external USB flash drive and there is no BOOTMGR file on that device. The boot sector or MBR on your system may be damaged or missing. The BIOS on your computer is outdated. Hardware upgrades issues. BOOTMGR Is Missing: How to Fix?

Why is my boot manager missing in WinPE?

The “BOOTMGR is missing” error message occurred to your computer probably due to the corrupted MBR. Thus, you can rebuild MBR for your computer. For this task, you can use the Windows installation disk and enter WinPE mode to rebuild it via Command Prompt, or directly use a professional MBR repair tool.