What is dial-a-flow tubing?

A dial-a-flow extension set, or dial-a-flow tubing, is a medical device that is used when regulating the flow of a liquid or fluid through an IV. Sometimes this device can also be referred to as a manual flow regulator or just an IV flow regulator. Unlike infusion pumps, flow regulators are regulated manually.

Who makes dial-a-flow?

This seal shall also be capable of snapping behind a corrugation of standard 4″ corrugated pipe. The flow control device shall be Dial-A-Flow™ as manufactured be American Manufacturing Co., Inc., Manassas, Va….

What is a dial regulator?

Dial regulators feature a transparent, pressure-calibrated, non-rising adjustment dial for quick adjustment of secondary pressure. The full reduced pressure range can be dialed in less than 270° of dial rotation. This feature is particularly advantageous if secondary pressure must be changed frequently.

How do you calculate manual drip rate?

The formula for calculating the IV flow rate (drip rate) is total volume (in mL) divided by time (in min), multiplied by the drop factor (in gtts/mL), which equals the IV flow rate in gtts/min.

How do you calculate dial a flow rate?

If you need to set this up on an IV infusion pump, use the formula, volume (mL) divided by time (min), multiplied by 60 min over 1 hour, this equals the IV flow rate in mL/hr. Using this formula, 100 mL divided by 30 min, times 60 min in 1 hr, equals 199.9, rounded to 200 mL/hr.

What is an IV flow regulator?

IV FLOW REGULATOR (MAISFLOW) The flow regulator is used to regulate the flow of I.V. fluid from the infusion set to the intravenous cannula and having a smooth kink resistance tube, ensures a constant flow rate. Technical Features: Precise control of flow rate of IV fluids with a range of 5 to 250 ml/hr.

What is IV set?

Intravenous Infusion set (IV set) is the fastest mode to infuse medication or replace fluids throughout the body from sterile glass vacuum IV bags or bottles. It is not used for blood or blood related products.

What are the types of IV tubing?

Primary Tubing for continuous infusions or for the primary infusion when a patient also needs an intermittent infusion of a piggyback (secondary) solution. Secondary Tubing to enter primary tubing right below the back-check valve. Match each IV type with the insertion site. In the arm or hand

What is dial flow?

Regarding this, what is a dial a flow? A dial-a-flow extension set, or dial-a-flow tubing, is a medical device that is used when regulating the flow of a liquid or fluid through an IV . Sometimes this device can also be referred to as a manual flow regulator or just an IV flow regulator. Unlike infusion pumps, flow regulators are regulated manually.

What is the size of IV tubing?

It is the tubing most commonly used for routine IV administration, such as infusion of IV fluids that do not contain sensitive medication. Macrodrip tubing comes in 3 sizes: 10 gtt/mL, 15 gtt/mL, and 20 gtt/mL. (Note: 10 gtt/mL, for example, means 10 gtt = 1mL.)