Why does my DVD player say invalid?
If you’re really unlucky, your DVD player might be defective. However, more often than not, a scratched or smudged disc or a dirty laser lens in the player is usually the cause of the error, and is something you may be able to fix in a few minutes.
Why isn’t my Blu-Ray player working on my TV?
Verify that the HDMI cable is securely connected to both the TV and the Blu-ray Disc player. Make sure the TV is set to the proper input. The video output resolution of the Blu-ray Disc player may be set to an option that is not compatible with the TV.
Why won’t my DVD player play sound?
Ensure the disc is inserted into the DVD player correctly. Ensure the audio cables from the DVD player are connected properly to the television or stereo receiver. Try playing a different audio source through the television or receiver. Connect the DVD player to a different audio input on the television or receiver.
How do I fix my Sony DVD player that won’t play?
If the issue continues, try doing a power reset.
- Turn off the DVD player.
- Unplug the power cord of the DVD player from the AC outlet.
- Let the DVD player remain without power for 1 minute.
- Plug the power cord back into the AC outlet.
- Turn on the DVD player.
Why isn’t my Sony Blu-Ray player working?
Make sure the settings of the Blu-ray Disc player is correct. Unplug the power cord of the Blu-ray Disc player from the electrical outlet. Let the player remain without power for one minute. Plug the power cord back into the electrical outlet.
Why is my Sony DVD player not working on my TV?
Ensure the video cable between the DVD player and TV is securely connected to both devices. NOTE: For best picture quality, use an HDMI, DVI, Component Video, or S-Video cable if both the TV and DVD player have one of these connection types. If not, the DVD player should be set to output an interlaced signal.
Why is my Sony Blu-Ray player not connecting to the Internet?
Power reset your modem/router Unplug the power cable to your modem/router and wait about 60 seconds. Reconnect the power cable to your modem/router and make sure it’s turned on. Wait until the device is finished making it’s connection to the internet and your network. Check if the issue is resolved.
How do I reset my Sony Blu-Ray player?
Follow these steps to perform a factory reset on your Blu-ray Disc™ player:
- On the supplied remote control, press the HOME button.
- Select Setup.
- Select Resetting or icon.
- Select Reset to Factory Defaults Settings.
- Select All Settings.
- Select Start.
- Select Close.
- Turn off your device, then turn it back on.
How do I get the sound to work on my DVD player?
Connect the AUDIO OUT ports on your DVD player to the AUDIO IN ports on your TV with standard audio cables (red and white jacks). Connect the AUDIO OUT ports on your TV to your speakers using a standard audio cable, or a Digital Audio (Optical) cable.
How do I unmute my DVD player?
It could be possible that the audio on your DVD player is entirely muted. To ensure that the audio is not muted, go to your DVD settings to check. Alternatively, you can also press the mute button on the remote to unmute the audio.
