Should I heat mold my ski boot liner?

Accelerate your liner’s break in time: Backcountry boots come with a thermo-moldable liner—it should be heated by the shop and molded to your foot before you ski. Most alpine boots don’t have a thermo-moldable liner. However, your shop may be able to warm your liner to accelerate the break-in process.

How do you heat a mold ski boot liner in the oven?

Most liners like to be heated to be about 200 degrees Fahrenheit in a convection oven. You’re going to crank yours to 350 and let it get up to heat. Step 2: You’ll do one foot at a time. Put one nylon stocking on, place the toe cap on your toes, and then the other nylon over it to hold it in place.

What temperature should I mold my ski boots?

Place the shells in the oven and start a timer for 10 minutes. The Kaprolene needs to be heated to approximately 176° Fahrenheit at its core, so make sure to leave the boots in for the full 10 minutes.

How many times can you heat mold ski boots?

After the liners have been skinned and skied in there is a limited number of times they can be remolded. 2-3 times is really the max but depending on how used and how old they are liners can sometimes be done up to 5 times.

How many times can you heat mold Intuition liners?

MLJ The guy at the shop I bought mine from told me I could remold my intuition pros 9 times, but that seems a little much. You could heat them as many times as you want really but once the liner is bedded in remoulding really won’t do much.

How much does it cost to heat mold ski boots?

MOLD YOUR BOOT SHELL TO YOUR FOOT Hair dryers don’t provide enough heat, and messing with your shell is the best way to screw up a pair of boots if you don’t know what you’re doing. Cost: $25 per area modified, up to $75-$100 per boot.

Can you heat mold a ski boot twice?

Once the boot and liner have been custom molded to your feet, there shouldn’t be a need to remold them a second time. If that is the case, they may opt to remold their ski boots.

Can you wash Intuition liners?

You can use anti-bacterial soap and water and swish it around in the liners, rinse with cold water and leave out to air dry. After they are completely dry, you can use an athletic foot powder to help prevent odor.

Can you heat mold boots twice?

Scarpa suggest you can remould the linings up to 5 times without problems, other people say twice. A word of warning, thermo linings do not adjust a boot that much, if the boot feels like it is the wrong size before moulding then it probably is.

Can you remold Intuition liners?

It may feel a bit better for a day or two but will pack out again quickly. If the liners are newer you will have better results but don’t expect a reheat to make them into new liners again. The guy at the shop I bought mine from told me I could remold my intuition pros 9 times, but that seems a little much.