What is the difference between 10600 and 10600s?
If you had desktop memory the same RAM would say DDR3 10600. Crucial and other companies have a way of not listing the RAM speed with the “S’ because in the title of the RAM you are purchasing it says “SO-DIM’ but when you get your RAM it will have the “S” on it if you are buying for a laptop.
What speed is PC3 10600s?
DDR3 speeds
| Friendly name | Industry name | Peak Transfer Rate |
|---|---|---|
| DDR3-800 | PC3-6400 | 6400 MB/s |
| DDR3-1066 | PC3-8500 | 8533 MB/s |
| DDR3-1333 | PC3-10600 | 10667 MB/s |
| DDR3-1600 | PC3-12800 | 12800 MB/s |
Is PC3-10600 the same as DDR3?
Today’s DDR3-1333 has a peak bandwidth of 10666 MHz, which can be improperly rounded down and called PC3-10600, rounded up to be called PC3-10700 or stated without rounding as PC3-10666 depending on the manufacturer’s desires.
What is the difference between PC3-10600 and PC3-12800?
The 12800 refers to a data rate of 1600MT/s while the 10600 is 1333MT/s so the faster 4GB module will be underclocked to run at the slower 1333 rate for uniformity which should not cause any issues, as long as the timings also match, especially with performance since 1333MT/s DDR3 is plenty fast for average everyday …
Can I use PC3 10600 instead of PC3-12800?
Yes most computers that use 10600 can support 12800.
What does PC3 10600 mean?
And for what it’s worth, the 10600 is another designation for DDR3 1333 DRAM, PC3 indicates DDR3 and the 10600 indicates the theoretical number of M/Ts (roughly MegaBytes per second)
What PC3-12800?
PC3-12800 is a PC DRAM bus specification. All x86 based computers use a 64 bit wide memory channel. When that memory channel is populated with DIMMs that use DDR3-1600 DRAM chips, the bandwidth is 12.8 gigabytes per second.
What is the highest MHz for DDR3?
The clock speed of DDR3 vary from 800 MHz to 2133 MHz. While the minimum clock speed of DDR4 is 2133 MHz and it has no defined maximum clock speed. 8. DDR3 has lower latency than DDR4.
