How do I create a boot disk for Windows 98?

  1. Click Start, point to Settings, and then click Control Panel.
  2. Double-click Add/Remove Programs.
  3. On the Startup Disk tab, click Create Disk.
  4. Follow the instructions on the screen.

How do I format a hard drive for Windows 98?

Then follow these instructions:

  1. Switch the Current Fixed Disk to 2. This is very important.
  2. Display the current partition information.
  3. Create a Primary DOS partition.
  4. Exit FDISK by pressing the Esc key.
  5. Reboot the computer to activate the new partition.
  6. Format each of the new drives.

How do you make a floppy bootable?

Creating a bootable floppy disk from scratch Click Start > Settings > Control Panel > Add/Remove Programs, and click the Startup Disk tab. Follow the instructions there (this part is not too complicated). You will then have to copy your CD-ROM driver onto the boot floppy, and configure it: 1.

How do I get into BIOS on Windows 98?

While booting press the “del” key to enter the system BIOS. In the first screen, press “down arrow key” to highlight the Power Management Setup and press “Enter”. The first Option is the ACPI Function if it is [Disabled] press “page up” key to change the value to [Enabled]. Press “F10” to save and exit.

Does Windows 98 still work?

No modern software supports Windows 98 anymore, but with a few kernel tweaks, OldTech81 was able to get older versions of OpenOffice and Mozilla Thunderbird designed for XP running on Windows 98. The most recent browser that works on Windows 98 is Internet Explorer 6, which was released nearly 16 years ago.

How do I install Windows 98 on an old computer?

Installing Windows 98

  1. Use a Win98 Startup disk (with CD support) to boot your computer.
  2. Insert your Win98 CD into the CD Rom drive.
  3. At the A: prompt type X:\Win98\Setup.exe where X: is your CD-ROM drive.
  4. Proceed with the install. When prompted for the install location, you’ll see C:\Windows.
  5. Complete the Win98 install.

How do I format a Windows 98 drive?

Format Hard Drive Win98

  1. backup any data you need to another media (floppy,tape ..ect).
  2. start->seeting->control panel->add/remove software ->(TAB) windows setup-> create a startup disk (Boot disk you need to boot with when reformating).
  3. LEave the boot disk in drive A: then Reboot your system.