How do you read a gate belt number?
First digit in Gates number corresponds to first two digits of industry standard number. Belt length is to the nearest tenth of an inch. Example: 2450 = 4L450 Belt has 1/2” top width and 45.0” O.C. First two digits indicate belt top width.
How do I read my Dayco belt number?
On the scale underneath the moveable pulley, the outer lines on the blue plastic will indicate the length of the belt in millimetres and inches. In this example the number 2045, which indicates a belt length of 2045 millimetres.
What size belt does a Snapper riding lawn mower use?
Snapper models 355Z, 360Z and 400Z take a deck drive belt 151 1/4 inches long and 1/2 inch wide on both 44- and 50-inch decks. Snapper carries this belt under part number 5023256. When you remove this belt, use the lever on the idler pulley to release the tension. This allows the belt to slip off the pulleys.
Are Dayco serpentine belts any good?
Dayco offers a quality belt that is 87.79 inches long, 0.82 inches wide, and 0.17 inches thick. It has six ribs and proves to be super reliable and safe. With it, you’ll ensure excellent engine performance and completely quiet rides. The belt is made from EPDM rubber, which means it’s extremely durable.
What do the numbers on a serpentine belt mean?
Most v-ribbed belts, commonly referred to as serpentine belts, contain two different part numbers. EXAMPLE: 6PK1003 » 6 – This indicates the number of ribs on the belt; therefore, this is a 6-rib belt. » PK – The “P” indicates a metric designation, and the “K” indicates the belt is automotive per SAE J1459.
What do numbers on belts mean?
The number following it is the outside length of the belt in tenths of inches. The inside length of the belt is typically 2″ less for a 4L belt, and 1-1/2″ less for a 3L belt. An example would be 4L460, which would be 46″ long outside, 44″ inside. The number following it is the inside length in inches.
