How do you program a GE Universal Remote 24912?

  1. Entry. Press and hold the.
  2. SETUP button until. the red indicator stays on, then release. the.
  3. SETUP button. Press and release the desired device. button (
  4. TV, VCR, etc.). The red indicator. blinks, then stays lit. Enter the 4 digit code.
  5. ON•OFF. If the device turns off, no further. programming is required. Note: If.

How do I use code search on GE Universal Remote?

Using Code Search Function on GE Remote

  1. Turn on the device you wish to program.
  2. Press and hold CODE SEARCH/SETUP until the INDICATOR LIGHT lights, then release.
  3. Press and release the device button for the device you are programming (TV, VCR,DVD, etc.).
  4. Press and release POWER until your device turns off.

How do I program a GE universal remote control volume?

  1. Press and hold the. SETUP button until. the red indicator stays on. (approximately 4 seconds) and then. release the button.
  2. Press and release desired device. button ( TV, DVD/VCR, CBL/SAT) for the. device you wish to setup to control. the volume.
  3. Press and release the. MUTE button.
  4. Press and release the.

How do I program my GE v2 universal remote?

Press and hold the SETUP button until the red indicator light stays on (approximately 4 seconds) and then release the SETUP button. Note: Once the light is on solid, immediately release the Setup button. 4. Press and release the desired device button on the remote (TV, DVD, SAT, AUX).

How do you program a universal remote to a Proscan TV?

ON MOST REMOTES:

  1. Turn on the TV.
  2. Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.
  3. With the button lit, point the remote at the TV and enter the TV’s 3, 4, or 5 digit code.
  4. Verify by pressing the VOLUME + button.
  5. Press the TV button to store the 3, 4, or 5 digit code.

Where is the code search button on a universal remote?

Press and hold the Code Search button until the light turns on. This button is usually at the top of the remote. When the light comes on, you can let go of the button.

What is the code for GE Universal remote?

ge universal remote codes

Brand GE Universal remote codes CL3, CL4 and CL5 versions
GATEWAY 0046
GE 0031 0107 0164 0004 0009 0044 0054 0000 0342 0003 0125 0015 0022 0052 0087
GIBRALTER 0121 0004
GOLDSTAR 0004 0009 0005 0227 0338 0012 0057 0080 0156

How do you program a GE Universal Remote 33709?

  1. Turn on the device you wish to program.
  2. LIGHT lights, then release. Press and hold CODE SEARCH/SETUP until the INDICATOR.
  3. programming (TV, VCR, DVD, etc.). The INDICATOR LIGHT will blink once then remain lit.
  4. 2 seconds between each time you press POWER.
  5. INDICATOR LIGHT will go off.

How do you program a GE Universal Remote?

Instructions to Program GE Universal Remote Manually. 1. First of all, you would want to power on the device you wish to control –TV, DVD, VCR etc. 2. Locate the Code Search/Setup button on your Universal remote. Press and hold this button. Do so until the indicator light comes on. Then release the button.

How do you set up a GE Universal Remote?

Turn on the device you are programming in to the GE Universal Remote. Press down the “Setup” button for 5 seconds until the red indicator light turns on. Press the device button, such as “TV,” “DVD,” or “AUX.”. Enter the 3 or 4 digit code. Once you enter a valid code the light turns off. Press the “Power” button to test to see if it worked.

What are the codes for GE remote control?

GE Universal Remote Codes. Here is the list with ALL of the device codes for GE remotes. ABEX 185, 172. ACME 003, 010, 021, 039, 049, 050. ADA 018, 025, 004, 007, 016.