What is an inline shutoff valve?

The Inline Shutoff Valve controls water supply as part of a HeatLink Smart System. This inline valve can communicate with one or more Water Leak Sensors to automatically shut off the water supply in the event of a water leak. The Inline Shutoff Valve connects wirelessly with a Gateway.

What type of valve should be used to shut off a line?

Ball valves
Ball valves are perhaps the most reliable type of valve and are commonly used for main water shutoffs and for branch line shutoffs. Like gate valves, a ball valve is designed as an all-or-nothing valve—they should be either fully open to allow full flow, or fully closed to stop all water flow.

What is inline valve?

Inline valves are probably the most common type of valve used in industrial automation systems; as their name suggests they fit directly in the individual line of each application. This, clearly, simplifies the pipework and centralises valves used for a particular process.

What are shut off valves used for CDL?

Quote From The CDL Manual: Shut-off valves (also called “cut-out cocks”) are used in the service and supply air lines at the back of trailers used to tow other trailers. These valves permit closing the air lines off when another trailer is not being towed.

Should water valves be fully open?

Similar to gate valves, ball valves should be all the way open to allow the full flow of water or all the way closed to restrict all water from flowing. The valve is controlled by moving it between 0 and 90 degrees. If the lever is aligned with the pipe, water will flow.

Can You rebuild a shut-off valve?

How to Rebuild a Shutoff Valve. Steps: Shut the water off to the house. Pull the handle off the shutoff valve using the screwdriver. Loosen the gland nut behind the handle using the wrench. Unscrew and remove the valve. Screw in the new valve from the repair kit. Tighten the gland nut back over the new valve with the wrench.

Where are my shut off valves?

Shut-off valves are usually found where the service line enters the house or business. Although this location varies depending upon when your home or business was built. Normally the shut off valve is located where a hose bib is also found, usually near the front of a home.

What type of valve is used to shut off a water line?

Ball valves are perhaps the most reliable type of valve and are commonly used for main water shutoffs and for branch line shutoffs. Like gate valves, a ball valve is designed as an all-or-nothing valve—they should be either fully open to allow full flow, or fully closed to stop all water flow.

Where is my water shut off valve?

The main shut-off valve is usually found on the side of your house where the water comes in from the water meter. Commonly this would be in the garage, basement, or crawl space just inside the foundation, often near the front faucet. It’s called a gate valve and most types look like a wheel.