Are spa jets interchangeable?

Many styles of hot tub jets are interchangeable as long as they are the same size. Most jets can be easily removed by turning them to the left and then they will pop right out. No matter what brand your hot tub is or if it has 4 jets or 40 jets, they can be the key to maximum enjoyment.

How do you remove Viking spa jets?

For removal, you may just need to rotate the jet counterclockwise until it pops out of the jet well. If you can’t easily remove it by hand, use a wrench. Tighten the wrench on your jet to get a good grip. Turn the wrench counterclockwise to loosen your jet until it becomes loose enough to pull out of the tub.

Are Viking Spas any good?

Viking Spas and hot tubs are generally considered to be a solid, mid-range hot tub. They have good build quality and the standard range of features, generally at a reasonable price point. While they don’t do too much out of the ordinary, they do use a proprietary filter system.

Where are Viking Spas manufactured?

Michigan
Made in Michigan but sold everywhere, Viking knows the importance of designing a product that will adapt to the harshest conditions. All Viking spas have passed and are listed on the California Energy Commission (CEC) website.

How much does it cost to replace hot tub jets?

The cost to replace a hot tub jet ranges from $150 to $200 per jet, including $75 to $100 for the part.

How many jets should a hot tub have?

Look for hot tubs that have 20-30 jets for every massage pump and at least 6 jets per seat. Jet size, placement and the power of the hot tub pumps are also crucial components of any hot tub hydrotherapy system and should be considered just as much as the number of jets the hot tub has.

Who owns Viking Spas?

Viking Spas CEO/President Tom Veneklase & Director of Sales & Marketing Tom Kneeshaw received the award on behalf of the company at a ceremony which took place at the White House in Washington, D.C.

What does F2 mean on Viking Spa?

The default cycle is F2, which means the pump will turn on for 2 hours and then turn off for 10 hours. The cycle will then repeat. To change the filter cycle press temp until the number is blinking then immediately press jet.