How do I troubleshoot my brother fax?
Problems receiving or sending faxes
- Press the Hook key to verify your Brother machine has a dial tone.
- Make sure your line connections are correct.
- Press the Hook key again to verify the Brother machine has a dial tone.
- Verify that no other applications or computers are downloading files.
Why won’t my faxes go through?
Ensure that the phone line cord is connected from the “Line” jack on the rear of the fax machine to the wall jack. If the cord is not connected fully to either the fax or the wall jack or not in the “Line” jack, it may be the source of your problem. Move or connect the cord properly.
How do I troubleshoot a fax problem?
Fax Troubleshooting
- Make sure your fax machine is connected to the phone line. There is a phone cord that connects the fax machine to a phone jack in the house and this is how it sends data to other fax machines.
- Check for dial tone.
- Check for interference.
How do I reset my brother fax machine 575?
Reset Your Brother Machine
- Press. [Settings]>[All Settings]>[Initial Setup]>[Reset].
- Swipe up or down or press or. to display the type of reset functions, and then press the reset function you want to use.
- [Machine will reboot after resetting. Press [OK] for 2 seconds to confirm.]
- Press .
Why isn’t My Brother fax machine working?
If you are experiencing issues sending faxes, follow the instructions listed below: Verify if your Brother machine has a dial tone. If there is no dial tone, verify the telephone line cord is connected from the jack (socket) on the Brother machine (labeled “LINE” for some countries) directly to the wall jack (socket).
How do I test my Brother fax machine?
How to Test a Brother Fax Machine
- Insert a document to fax into the fax machine’s page loader.
- Dial 1-888-473-2963 (1-888-hpfaxme) on the fax machine’s keypad.
- Press “Start” or “Send” on the fax machine to begin the transmission.
- Wait a few moments for a return fax from the HP Fax Test Service line.
How can I test my fax machine?
To test a fax machine simply fax to somebody else with a fax machine – and have them send a reply fax back to you. When sending the fax, turn on the confirmation page feature – a successful confirmation page shows that the fax machine on the other end has successfully received the message.
How can I test if my fax machine is working?
Send a one page black and white text fax to 1-888-hpfaxme (1-888-473-2963). When your fax is received by the HP Test Fax Service, we will generate a return fax to you within five minutes confirming that we received your fax. This verifies that you can both send and receive a fax with your fax machine.
How do I reset a fax machine?
Restart the machine as instructed by the message on the touch panel (turn off the power by pressing the [POWER] button and then press it again to turn on the power). When using the fax or Internet fax function, always keep the main power switch in the ” ” position.
