Can you nail DensGlass?
DensGlass Sheathing can be attached parallel or perpendicular to wood or metal framing. Nails or screws, as listed in the fastener chart, may be used to attach DensGlass Sheathing to framing.
Can DensGlass be used below grade?
Do not apply DensGlass Sheathing below grade. For all installations, design details such as fasteners, sealants and control joints per system specifications must be properly installed. Openings and penetrations must be properly flashed and sealed.
Is DensGlass exterior sheathing structural?
DensGlass SilverTM residential structural wall sheathing incorporates the proven glass mat Dens TechnologyTM with a moisture-resistant core to produce a residential exterior sheathing that: Meets requirements of ASTM C 1177 and applicable sections of ASTM C 79. Provides moisture resistance.
Does DensGlass need a moisture barrier?
It is not required to provide a water-resistive barrier over DensGlass Sheathing for the protection of the gypsum sheathing itself during the 12-month weather exposure limited warranty.
Do you need a vapor barrier over DensGlass?
How do you cut DensGlass?
The nice thing about this product is you can cut it with a utility knife just like using regular drywall. Georgia Pacific publishes a pretty good resources for showcasing and using DensGlass Sheathing.
How do you cut DensGlass sheathing?
Is DensGlass waterproof?
It is a ready-mixed, flexible, waterproof coating which can be used on gypsum, cement or wood based sheathing substrates. Sto VaporSeal over DensGlass panels can be used on vertical above grade walls.
Can you use Kerdi band on DensShield?
I also had the same concern with DensShield allegedly being 100% waterproof and using Kerdi over it. After talking with Schluter, they convinced me that DensShield is not truly 100% waterproof and they actually recommend Kerdi over it.
What can you use densglass sheathing for?
DensGlass Sheathing is the ideal substrate for a wide variety of air and water-resistive barriers including building wraps, liquid applied coatings and self-adhering membranes. See page 9 for details. Easy to Handle
What makes densglass the best gypsum for soffits?
It’s extremely resistant to rippling, buckling and sagging, even under humid conditions, which makes it particularly suitable for soffits. In actual tests, DensGlass panels exceeded ASTM C1396 standards for humidified deflection by a factor of five times over the standard for paper-faced gypsum sheathing.
What should I use to finish a densglass board?
Finish joints as described in method #1. Apply a bonding agent to entire DensGlass Sheathing surface. Apply a 2-coat thin stucco system directly to the DensGlass Sheathing (2-coat system not to exceed 1/4”to 3/8” total thickness). Important: Illustrations not intended for design or specification purposes.
What kind of siding can be used over densglass?
Most conventional exterior sidings and wall coverings — including wood, vinyl, composition, metal, stone, brick, wood shingles, shakes and plywood panels — may be applied over DensGlass Sheathing. Consult your local building codes for water resistive barriers (WRB) requirements.
