What does it mean when the airbag indicator flashes?
It could mean that your battery backup is drained, that you have a worn-out airbag clock spring, or that your SRS airbag control module is faulty. It can also mean that something is wrong with your seat belts or impact sensors.
Is it safe to drive with airbag light flashing?
Is it safe to drive with an SRS light on? It doesn’t necessarily mean that the car isn’t safe to drive but it’s like playing with fire if you do. When this light is on it means your safety system isn’t working at 100% and in some cases, it could mean that your airbags are disabled and will not deploy in an accident.
Why does my airbag light keeps coming on and off?
If your airbag warning light remains on long after starting your car, either the light is faulty or the airbag. The light comes on for a few seconds and then goes off to show that it’s working. If it remains on, then there’s a problem with the system, and the airbag may not deploy in an accident.
Can I reset airbag warning light?
You can reset the airbag light on your vehicle from your home garage, saving yourself a trip to the dealership or mechanic. After all repairs have been performed, you can reset the airbag light yourself using a handheld computerized tool purchased from an auto parts retailer.
How do I reset airbag warning light?
How to Reset an Airbag Light
- Put the key into the ignition and turn the switch to the “on” position.
- Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.
- Repeat Steps 1 and 2 two more times.
What is the code for the air bag warning light?
Lamp flash code: 12 1.6 DTC B1869: Air bag warning indicator open circuit or short to ground. Lamp flash code: continuous 1.7 DTC B1870: Air bag warning indicator short to battery. Lamp flash code: continuous
How does the airbag warning light work on a Ford?
by Alexander Poirier. When there is a problem with a Ford’s airbag, the airbag warning light will illuminate and flash a code that identifies the problem. Because airbag problems range from a lost battery feed to a shorted circuit, it is important to understand the codes so that the airbag can be properly repaired.
What does the code 13 on an air bag mean?
Code 13 (single flash, pause, three flashes) means that the airbag circuit has shorted to ground and Code 14 (single flash, pause, four flashes) means that the primary crash sensor circuit has shorted to ground. These codes are signaled by two flashes, a two-second pause and the number of flashes that corresponds to the second digit.
