Can I use decking oil on furniture?

The oil penetrates into the timber to keep it supple and protected from water ingress, cracking, warping, and splitting. Alternatively, using a clear decking oil is also a good way to weatherproof and protect wooden garden furniture and benches.

What is the best decking oil for Jarrah?

Keep your deck looking it’s best with Cabot’s Natural Decking Oil, a fast-drying, deep penetrating oil that helps to nourish and protect exposed timbers.

What colour is natural decking oil?

Natural Decking Oil – Traditional Pine colour.

Does deck oil protect wood?

A decking oil is designed to protect timber without dramatically changing look of timber. You can even choose mild colours to accentuate the colour in timber species such as Merbau and Jarrah. If your deck is made from hardwood, we recommend using an oil as your best option.

Can you use decking stain on garden furniture?

Odd as it may sound, clear and coloured decking oils are a great way to protect and colour wooden garden furniture. Highly durable and weather resistant, decking oils often contain UV filters and are great for bare wood or previously oiled furniture.

Is Intergrain better than Cabot’s?

From Cabot’s comes Intergrain UltraDeck, a water based, highly durable penetrating oil designed to protect the natural look of timber. Emitting signficantly less VOCs than oil based coatings, Intergrain products are more environmentally responsible as well as high performance.

Is Jarrah or merbau darker?

Jarrah is an Australian hardwood. It is heavy, tough with a distinctive dark red colouration. Merbau is a South East Asian rainforest hardwood that is also known as Kwila. It is a durable, dark reddish brown timber that is high in tannin content.

How long does Cabot’s Decking oil last?

Every 12 months check your coated timber for changes in colour or water repellency diminishes due to weathering.

Is natural Decking Oil clear?

Decking Oils are widely available in both clear (natural) and coloured formulations. Designed to penetrate in to the surface grain of the timber, decking oils protect wooden decking from within.

How often should you oil decking?

once every 6-12 months
How Often Do I Oil My Deck? Within the deck building industry, it is usually recommended that decks need to be oiled once every 6-12 months.

Is it better to stain or oil decking?

If you want to maintain your wooden deck’s natural look, decking oil might be the suitable choice. But if you are looking for a preservative that will help you change the colour of your wooden deck, a decking stain is recommended.

How to use Cabot’s natural decking oil everyday?

When required, 1. Clean the surfaces with Deck Clean as per label instructions. 2. Recoat with 2 coats of Natural Decking Oil. • Use Cabot’s Everyday Deck Wash to refresh exterior timber decking and help remove dirt, dust and bird droppings for everyday use. Base colours below are available instore to purchase.

How to apply Cabot Stain to outdoor furniture?

Application. If spraying Cabot Australian Timber Oil for Decks and Outdoor Furniture, immediately backbrush after each section is coated to ensure proper penetration. To avoid lap marks, start at one edge and follow through to the end of the boards. Apply Cabot Australian Timber Oil for Decks and Outdoor Furniture to small sections at a time,…

How often to apply Cabot Australian timber oil?

Apply Cabot Australian Timber Oil for Decks and Outdoor Furniture to small sections at a time, 2-3 boards at a time. Product that does not penetrate must be removed or rubbed into the boards parallel to the wood grain.

What’s the best way to clean a Cabot deck?

Remove excess water from the surface with squeegee on Cabot’s Deck Prep brush, and allow timber to dry for at least 1 hour. Note: Cooler conditions could slow down the drying time of the timber. Remove back to bare timber using a paint stripper, or sanding. For exterior surfaces clean with Cabot’s Deck Clean following label instructions.