How do you make wood look like reclaimed wood?

Liquids: White vinegar, stains, and paints are three types of fluids you may want to use for faux-aging wood. Vinegar creates a silvery-gray appearance. Stains darken the wood and highlight mechanically distressed areas. Paints can be applied in two coats, then sanded down for a weathered effect.

Should I polyurethane a barn door?

Once the barn door is fully painted, you will be able to still manipulate the finish until you give it the final seal with the clear lacquer or polyurethane coat. If the door will be used for an exterior application, then you will want to use a polyurethane as it is much stronger and resistant to weather and water.

How many coats of stain do I need for a barn door?

And it’s a quick process to stain. Literally, just dip your sponge in stain and wipe it on. Do 2 coats for a richer,deeper color letting the coats dry fully in between!

How do you make new wood look beat up?

This technique is subtle, so it’s done after sanding. Place a wire brush at an angle on the board and run it with the grain. This will dig out the softer wood between the grain and give the surface more texture, which really helps make new wood look old. Wire brushing is more effective on soft woods such as pine.

What kind of stain to use on faux barn wood?

Here is a tutorial for how to use a weathering stain from Jennifer Atwood. The Magic Brush (Jennifer Atwood) using a weathered wood stain and a few inexpensive staining tools. 10) Faux barn wood painting with chalk paint. Getting that greigey grey look with chalk paint and wax is possible, as well.

What kind of paint to use on barn wood?

Every time you use them you’ll get yourself quite unique wood boards. (via cherishedbliss) To achieve this finish you’ll need to use grey latex paint and dark walnut stain. Make sure to mix the paint with water to get a light grey-wash look. (via akadesign) When you think about barn wood you always imagine old gray wood boards.

What kind of wood is used in barns?

Barns are an indispensable part of rustic life and today they aren’t only used for hay or animals, they are repurposed into homes, garden houses and other things. Any barn has that special comfy feeling: warm wood with rusty touches creates coziness and gives joy, whatever the design is.

What do you use to distress barn wood?

To distress it you need an old rusty chain. Just toss, drop, and whip your chain everywhere. (via brandisawyer) This faux surface is used as tabletop for two IKEA’s file cabinets. It’s covered with Olympic brand Weathered Barnboard stain and later distressed with random tools like a hammer. (via tipjunkie)