How do I bridge my iinet router?
Set up Wireless Bridge
- Check the stickers on the bottom of your Wireless Bridge units.
- The AP Wireless Bridge must connect to your modem.
- Plug one end of an Ethernet cable into the LAN port on the back of the AP Wireless Bridge.
- Plug the other end into an available LAN port on your modem.
Can you connect to a bridge wirelessly?
Place the wireless bridge within range of your wireless router’s signal, and also within a cable’s length of your wired devices. If your router supports Wi-Fi Protected Setup, or WPS, setup is easy. Simply press the WPS buttons on your bridge and router to link them wirelessly.
How do I set up wireless bridge mode?
To set up bridge mode:
- Make a note of the WiFi settings of the other router to which this router will connect.
- Launch a web browser from a computer or mobile device that is connected to the network of the router that will run in bridge mode.
- Enter the router user name and password.
How do I connect to iinet extender?
It’s a simple process:
- Place the Wireless Extender next to your current wireless modem.
- Press the WPS button on your Wireless Extender.
- Then press the Wireless Protected System (WPS) key on the Wireless modem or Wireless Router.
What is the difference between bridge mode and wireless bridge?
A wireless access point connects users to a network by creating a wireless signal they can use. In contrast, a bridge connects separate networks such as a wireless home network to all devices connected to the bridge.
Does bridge mode turn off wifi?
The WiFi will be disabled when you put it in bridge mode and most likely you will even be told that when you do so. Bridge mode disables routing on the modem and it is no longer capable of handling wireless clients.
