How much does a mechanic charge to replace a timing chain?

Typical costs: Hiring a mechanic to replace a timing chain typically costs $300-$1,000, depending on the make and model of the vehicle, its age and whether the work is performed at a dealership or an independent shop. Purchased separately, a timing chain typically costs $50-$250 or more.

How much does it cost to install a timing chain?

Replacing the timing chain is a complicated job, and the labor costs can be quite high. For most cars, a timing chain replacement costs between $413 and $1040, or you can order the parts themselves for $88 and $245.

Is it hard to replace timing chain?

Changing a timing chain is not outright difficult but is considered a complex job due to the large number of steps involved. The timing chain and water pump are both labor-intensive jobs in the same area of the engine, so knocking out both now can prevent having to do many of the same steps again later.

Do you need to remove engine to change timing chain?

When changing the timing chain, you will need to disassemble and reassemble different engine parts. That’s why you will need your owner’s manual as the guide in locating the timing chain of your car.

How hard is it to change a timing chain?

What should I know about timing chain removal?

FR-S FA20 Engine Timing Chain REMOVAL and INSTALLATION The Timing Chain REMOVAL procedure is AS IMPORTANT as the Installation procedure!!! The following clarifies both.

How do you change the timing chain on a corvette?

Using a crankshaft socket, turn the motor over in the direction of rotation until the marks on both sprockets are facing one another (see photo 4). When the sprockets are in this position, the No. 6 cylinder is at TDC.

Where are the timing marks on a VVT controller?

However there are some tips to ease installation: VVT Controller Timing Marks: On the side of the controllers are grooves that the pink links on the Timing Chain will align with. It is recommended to highlight the grooves with a permanent marker for better visibility and identification.

Where is the timing mark on the No.1 cylinder?

To achieve TDC of the No. 1 cylinder, simply turn the crankshaft one full revolution. The camshaft timing mark will now be at the top of the sprocket. In reference to the marks, there will be a small circle machined on the surface of each sprocket.