How to measure temperature with sanitas?
The normal temperature ranges are as follows: On the forehead: 96.4 °F – 99.7 °F (35.8 °C – 37.6 °C), measured with a forehead thermometer….
- Press the POWER button for 1 second to switch the thermometer on.
- Then press the MEMORY and buttons simultaneously for 3 seconds to switch to the Object temperature mode.
How to change fahrenheit to celsius in the sanitas thermometer?
The thermometer can display the temperature in both degrees Celsius (°C) and degrees Fahrenheit (°F). To switch between these measurement units, proceed as follows with the device switched off : Press and hold the On/Off button until the device switches from °C to °F or vice versa.
What does Sanitas thermometer mean?
Jen legood 21-01-2020. Lo can mean the temp of the room you are in is less than 17 degrees try in a warmer room. Michael Holder 26-08-2020. “Low battery” message. New batteries does not solve the problem.
How to clean a thermometer?
Clean your thermometer before and after you use it with either rubbing alcohol or lukewarm soapy water, then rinse with cool water. Wipe it dry with a clean cloth or let it air dry.
What does Lo mean on a digital thermometer?
LOW TEMPERATURE
It is standard practice for the majority of digital thermometers to display a “LO” sign when turning the device on. This means “LOW TEMPERATURE”. This is because these types of thermometers are made to measure Body Temperature, so when outside the body, the temperature is usually LOWER.
What does Lo c mean on a thermometer?
A: When the letters “Lo” and a flashing “°C” or “°F” display, the thermometer is now ready for use. If the ambient temperature is below 32°C or 89.6°F, then “lo°C” or “Lo°F” will appear on the LCD and if it is mor… see more.
Can you use Clorox wipes on thermometer?
Digital Thermometers “If you’re using a digital thermometer, it’s best to wipe the thermometer down with rubbing alcohol or a bleach wipe and let the thermometer dry,” says Dr. You can also grab a bleach wipe. Coat the entire body of the thermometer with the disinfectant solution, making sure to rub it in thoroughly.
How do you sterilize a thermometer?
Use a cotton swab dipped in alcohol to clean inside any small crevices. Allow the alcohol to air-dry on the thermometer to effectively kill germs. If desired, rinse the device under cool water to remove traces of alcohol, taking care not to wet any electronic elements, such as the display.
How do I fix the LO on my thermometer?
The ‘Lo’ or ‘Hi’ indications on the display mean that the temperature cannot be measured because the temperature is outside the temperature range. Press the on/off button to switch off the thermometer. Check if it is correctly positioned, press the on/off button again to switch it on, and re-start the measurement.
