What is ea9394?

Description. Hysol EA 9394 is a two-part structural paste adhesive, which cures at room temperature and possesses. excellent strength to 350°F/177°C and higher. Its thixotropic nature and excellent high temperature. compressive strength also make it ideal for potting, filling and liquid shim applications.

What is Hysol glue?

Hysol glue is a great product. It is a great glue that makes very strong joints and remains slightly flexible when cured. This is perfect for gluing formers in a fuselage for example.

How long does Hysol take to cure?

Complete cure is obtained after 72 hours @ 25 °C. LOCTITE® Hysol® 1C™ can also be fully cured with heat such as; 2 hours at a maximum temperature of 60 °C. 2. After 24 hours, approximately 90% of full cure properties are attained at room temperature.

What is liquid shimming?

Abstract. Liquid shim is an epoxy-based paste commonly used to fill gaps encountered in composite assemblies, found for example in primary aircraft structures, allowing a better load transfer between mechanically fastened components.

What is Hysol epoxy used for?

Loctite Hysol 608 is a clear, fast setting epoxy adhesive used in many applications where optical clarity and/or fast cure rates are needed. Hysol 608 bonds a variety of materials including metals and plastics and is excellent for general connector use.

What is shim adhesive?

Master Bond liquid shims are epoxy materials designed for composite bonding applications. They eliminate gaps between composite surfaces and offer high compressive strength properties. They are commonly used in aerospace applications, such as composite rib-to-skin assembly and other load bearing structures.

What is Loctite retaining compound used for?

LOCTITE retaining compounds offer an inexpensive and effective method to secure bearings, bushes and cylindrical parts into housings or onto shafts.

How long does Loctite 680 take to dry?

24.0 hr.
Technical Information

What is liquid shim?

Liquid shim is an epoxy-based paste commonly used to fill gaps encountered in composite assemblies, found for example in primary aircraft structures, allowing a better load transfer between mechanically fastened components.

Can you use threadlocker as retaining compound?

Yes, you can. Normally we recommend retaining compounds like LOCTITE 638 for such applications, but threadlockers and retaining compounds both are same in terms of chemistry i.e. they are anaerobics.

How long does hysol EA 9394 take to cure?

Curing – Hysol EA 9394 may be cured for 3 to 5 days @ 77°F/25°C to achieve normal performance. Accelerated cures up to 200°F/93°C (for small masses only) may be used as an alternative. For example, 1 hour @ 150°F/66°C will give complete cure.

What is the strength of Loctite EA 9394 Aero?

LOCTITE EA 9394 AERO, epoxy paste adhesive LOCTITE® EA 9394 AERO is a two-part structural paste adhesive, which cures at room temperature and possesses excellent strength to 350°F/177°C and higher. Its thixotropic nature and excellent high temperature compressive strength also make it ideal for potting, filling and liquid shim applications.

How long to prepare hysol for surface preparation?

For optimum surface preparation consult the Hysol Surface Preparation Guide. The bonded parts should be held in contact until the adhesive is set. Handling strength for this adhesive will occur in 24 hours @ 77°F/25°C, after which the support tooling or pressure used during cure may be removed. Since full bond strength has not yet been attained,