How much PSI does a Fox Float RP23 have?
Pressurize your main air chamber to a minimum of 50 psi and no more than 300 psi.
What is Fox Pro pedal?
Pro Pedal was developed by Fox to help eliminate pedal bob. Its a great system that really works. Next time you have your bike, put your weight on the saddle with Pro Pedal on, and then off. You will see how much more sag there is with it off.
How do you service a Fox Float rear shock?
Instructions
- Remove Shock from frame.
- Secure in a vice by the head eyelet.
- Depressurize.
- Unscrew air can.
- Wipe off fluid.
- Remove end seal.
- Remove air can seals.
- Clean air can with isopropanol and a lint free cloth.
Where can I get the manual for the Fox float rp23?
Have a look at the manual for your specific RP23 or download it from the fox website. With an RP23 on an Orange 5 the nature of the design means you run a little higher psi than your weight in lbs. Because suspension designs and riding skills vary, optimal settings can vary from bike to bike and rider to rider.
How to pressurize a float rp2-fox suspension?
Remove the main air chamber air cap and let all the air out of the main air chamber. Carefully cycle the suspension through its entire travel. Check that all parts of the shock are clear of the frame and swingarm as it cycles through the travel. Pressurize your main air chamber to a minimum of 50 psi and no more than 300 psi.
What should air pressure be on float rp23?
Carefully cycle the suspension through its entire travel. Check that all parts of the shock are clear of the frame and swingarm as it cycles through the travel. Pressurize your main air chamber to a minimum of 50 psi and no more than 300 psi. You will tune to a more specific air pressure in the Setting Sagsection below.
What should the PSI be on a Fox float?
For faster reboundturn the red adjuster knob counterclockwise. At just over kg I run circa lb on my Alpine. It should provide a stiffer ride but still provide full suspension action. Usually a good starting flozt is your weight in lbs in psi.