How do I unlock OSD on Viewsonic monitor?
Press and hold down the button labelled “1” as well as the “down” arrow. After 10 seconds, release both buttons simultaneously. This should unlock the OSD, which gives you full access to the monitor’s control panel.
How do I unlock OSD locked monitor?
The OSD lock can be enabled or disabled by pressing and holding the Menu button on the front panel for 10 seconds. If the OSD is locked, the warning message OSD Lock displays for ten seconds. If the OSD is locked, press and hold the Menu button for 10 seconds to unlock the OSD.
How do you unlock the buttons on Viewsonic?
To lock and unlock the buttons found at the bottom of your IFP other then the power button price volume down twice, the gear once, and the home button once in sequence. (When locked the only button that will work is the power button the other buttons will be inoperable.)
How do I enable OSD on my monitor?
Stands for “On Screen Display.” Most monitors include an on screen menu for making adjustments to the display. This menu, called the OSD, may be activated by pressing the Menu button located on the side or front of your monitor.
How do I remove OSD lock from ViewSonic monitor?
OSD Lock: To lock the OSD Menu press and hold both the [1] button and the up arrow button for 10 seconds. Note: These same buttons, when pressed for another 10 seconds, will unlock the feature. If you have front panel soft touch buttons they are labeled as seen in the image below (Figure 1).
What is a OSD Lockout?
OSD lockout prevents the OSD menu from opening on the screen when a button is accidentally pressed. note: To remove the OSD Lockout message, release the Menu button (if something was pressing against it), and press and hold the Menu button again for about 10 seconds – until the message goes away.
How do I remove the onscreen menu lock?
Turn off the monitor, press down the Menu button and then turn on the monitor. Wait 10-20 seconds. This should unlock the OSD.
How do I unlock the Thinkvision Monitor menu?
Press and hold for 10 seconds to lock the OSD. This will prevent accidental adjustments to the OSD. Press and hold for 10 seconds to unlock the OSD and allow adjustments to the OSD.
How do I unlock my computer screen?
Resolution
- Press and hold the main menu button on the monitor for 10-15 seconds.
- The lock symbol should change to an open padlock.
- Set the preferences as desired.
Why is OSD locked?
What is OSD Exit key?
The OSD mode is to change some settings of camera. long press the wifi button to access the interface of OSD menu; Under this menu, the power button is for “down”, the wifi button is for “confirm” and long press wifi button, it will quit the OSD menu.
