How do I load paper into unisonic XL 1149?
Pull the lever up that is located near the paper slot in the back of the adding machine. Take hold of the edge of the paper and feed it into the paper slot. Put your finger on the paper roll-up knob and spin the knob toward the back of the machine. This will turn the rollers inside the machine and push the paper up.
How do you change the paper on a Sharp calculator?
- Cut the leading edge of the new roll of paper to give it a straight edge.
- Slide the power switch to the left to the “Off” position to turn off the calculator.
- Hold the new roll of paper so that it unrolls from the bottom.
- Insert the edge of the paper roll into the opening at the top of the calculator.
How do I change the ribbon on my Canon add machine?
How to Change the Ribbon in a Canon Calculator
- Turn off the calculator.
- Pull up on the tab on the far side of the printer cover to remove the cover.
- Pinch together the ribbon lock (the arrow shows you the direction to pinch).
- Separate the new ribbon spools.
How do you load paper into a sharp El 2192RII?
Place the roll of paper in the slot at the top of the calculator. The paper should be no larger than 58 mm wide and 80 mm in diameter, according to the Sharp EL-2192RII manual. Press the “On” button and type in a math problem. The operators are “*”, “-“, “/” and “+”; then press the “=” button.
How do you feed paper on a calculator?
Look for a slot at the back of the calculator where the paper will fit through. Pass the end of the paper through the rear slot and then into the internal feed slot. Hold down the [FEED] key. Then put the arm back to attach the roller and replace the top cover if required.
How do you feed paper to a sharp adding machine?
Insert the cut edge into the paper opening on the back of the Sharp EL-1801V. Hold the paper roll so that the edge being fed into the machine is coming from the bottom of the roll. Turn the power on. Press the “Feed” button until the paper is fed through the unit.
How do you calculate paper feed?
Switch the calculator power to the ON position. Hold down the FEED button on the calculator. At the same time, feed the paper roll straight into the paper slot. Confirm the paper roll is fed into the calculator.
How do you feed paper to sharp el 1750v?
Install the paper. The paper feeds directly into the back of the calculator with the roll of paper unrolling clockwise as you look at the roll from the right-side of it. Don’t tear the paper before inserting it as this will cause a jam.
