How do I reset my Digiweigh digital scale?

Reset the scale by pressing (ON/OFF] key. 2. Wait until the LCD displays “0.0”/”0.00″and then press and [MODE] key for 3 seconds, the LCD will display “CAL”, and then release the [MODE] key.

How do you calibrate a Digiweigh scale without weights?

First, turn the power on, then press the “Zero” or “Tare” button if there is one present. Wait patiently while the scale clears any remaining data from previous uses. It may take a second, but your scale should show a “0.00” weight once it is zeroed.

How do you use a Digiweigh scale?

Place the scale on a rigid horizontal flat surface. Press ON/OFF button to switch on the scale and wait until “0.0” is showed on the display screen. Please make sure the scale is under the environment with stable temperature. Put the object(s) on the center of the platform.

What does Blit mean on a scale?

BLIT is a feature that allows the numbers to be featured with a blue background. Simple, hit BLIT a blue background with your scale numbers appear. To shut off the blue background just hit BLIT.

What weighs 100 grams to calibrate scales?

If you have 20 nickels, or 40 pennies, you have 100 grams that you can use for calibration. Place the coins on the scale and observe the reading. The mass should read 100.000 grams exactly.

How do you calibrate a Digiweigh scale?

Turn the scale off then press and hold the “Mode” and “Tare” keys simultaneously. While holding “Mode” and “Tare”, turn the power back on. Continue holding the two buttons until you see a series of numbers or a message that indicates that you may continue.

What can I use to calibrate scale?

Place a calibration weight, a U.S. coin, or household item on your scale. As long as you know the exact weight of the item, you can use it to calibrate the scale. If you don’t know the exact weight, don’t use the item to calibrate the scale as it can be harmful for the scale if the item is too heavy.

How do you calibrate a pocket scale?

Press [MODE] key gain, the display will flash “CAL” followed by the required calibration weight. Add the Smart Weigh 500 g calibration weight on the center of the platform, after a few seconds, the display will show “PASS”. Calibration is complete!

What can I use to calibrate my digital scale?

How do I fix my digital weighing scale?

Reset and Test Your first step should be to reset your scale. Look for a knob, slide or some other way to adjust the weight display. If one exists, turn it until the scale reads zero. If not, your scale may feature a special code to reset it to factory conditions.