How many fuses are in a GE microwave?

Your microwave may have two types of fuse. The line fuses are usually familiar ceramic tubes, about 1ΒΌ inches (3 cm) long. The thermal cutoff fuses are typically squat black cylinders with two prongs on the same side. Their exact location depends on your model, but check behind the control panel.

What kind of fuse does a GE microwave use?

This high quality Genuine OEM GE Appliances Line Fuse (WB27X10388) protects the Microwave from damage by shutting off the Microwave if there’s a power surge . The Line Fuse has approximate measurments of L:1.25″ x W:0.25 x H:0.25″ and is sold individually.

What do I do if my microwave fuse is blown?

How to Replace a Blown Fuse

  1. Disconnect the microwave from the power source.
  2. Remove the relevant access panel.
  3. Unscrew or unclip the fuse and remove it from the microwave.
  4. Test the fuse with a multimeter for continuity.
  5. If defective, replace the fuse with a new one that matches the fuse you removed.

Does a GE microwave have a fuse?

The fuse is located under the plastic grill at the top of the microwave. It’s held on by two screws. Once you’ve removed the screws and taken off the plastic grill, you go to the right side of the microwave and remove another screw that holds a small metal grill in place.

Where is the fuse located on a GE microwave?

Where are microwave fuses located?

Fuses are located in many places inside the microwave, including the top, side, and behind the vent grille. Using the wiring diagram can help you locate the appropriate fuse. Once you have located the fuse, remove any necessary wires and fasteners to free it from the microwave.

Why does my GE microwave keep blowing fuses?

If a microwave fuse keeps blowing, it may be because the fuse is not being installed correctly or that the wrong type of fuse is being installed. Microwave parts like door switches or the magnetron, if defective or wrongly installed, will also cause microwave fuses to continuously blow.

Where is the fuse located on GE microwave?

How to reset a GE Spacemaker microwave?

Locate the “Clear/Off” button on the front of the microwave.

  • Carefully pull the microwave away from the wall enough that you can reach the wall outlet.
  • Grasp the power cord at the base of the plug where the plug meets the wall outlet and pull it out of the wall outlet.

    • How do you replace a fuse in a microwave oven?

    Look for the fuse inside the exposed controls of the microwave. The fuse is located in a small receptacle with two wires running to it. Use a flat screwdriver to pry up from the bottom of the fuse. The fuse will pop out. Replace the fuse with a new one.

    Where is the fuse box on a microwave?

    Fuses in microwaves are generally located behind the control panel. They can be close to the panel, midway back in the microwave case, or all the way back on the rear wall of the housing.

    Does microwave have fuse?

    Your microwave has a 20 amp fuse connected in series with the line one (L1) power supply circuit. Microwaves inherently store very high voltages (20,000) even when unplugged from the power source.