Why are Perlick faucets better?
In a Perlick faucet, there’s a much more positive action to it. There’s no “shuttle” piece, because the ball of the lever creates and opens the seal. So instead of a glide, it’s more of a click-clunk. A Perlick is either open or closed; there is no in-between.
Do I need a flow control tap?
These faucets feature a special lever on the side that restricts the flow so that you don’t end up with a foamed-over glass. Flow control faucets are required equipment if you are going to be serving carbonated cocktails on tap.
What does a flow control faucet do?
Flow control faucets feature a built in flow compensator that allows you to adjust the resistance your faucet is exerting. That means less tubing and potentially less foaming and wasted beer.
Where are perlick faucets made?
INNOVATION AND CRAFTsMANSHIP ARE IN OUR DNA Perlick Brass Works in Milwaukee, Wisconsin.
How do perlick faucets work?
There are two different types of standard draft beer faucets: rear sealing and forward sealing. The lever on a Perlick faucet has a ball (or Perl) at the end of it, which swings back and forth like a pendulum when the lever is operated. The ball fits inside a floating o-ring in the front of the faucet to seal it shut.
How does a perlick tap work?
The lever on a Perlick faucet has a ball (or Perl) at the end of it, which swings back and forth like a pendulum when the lever is operated. The ball fits inside a floating o-ring in the front of the faucet to seal it shut.
Does perlick make a stout faucet?
Perlick 63927 Stout 304Ss Faucet.
How does perlick flow control work?
Instead of a valve shaft that opens and closes a valve and the back of the faucet, the flow is controlled at the front end. The lever on a Perlick faucet has a ball (or Perl) at the end of it, which swings back and forth like a pendulum when the lever is operated.
How does perlick faucet work?
Perlick’s range of forward sealing faucets are the most sanitary beer and wine faucets on the market. They feature a revolutionary ball and floating O-ring design that eliminates the need for a valve shaft. This leads to cleaner dispensing because the beer and wine are not exposed to air.
How do you clean perlick faucets?
If your specific cleaning procedure requires removing the faucet from the dispensing head, soak the faucets in cleaning solution for 10-15 minutes. Use a faucet brush inside the spout, then brush out from the back of the faucet (there is no need to remove the handle assembly.)
What beers are from Milwaukee?
The 9 Most Important Beers in Milwaukee’s Brewing History
- Schlitz Lager. Joseph Schlitz Brewing Company.
- Pabst Blue Ribbon. Pabst Brewing Company.
- Miller High Life.
- Miller Lite.
- Special Amber and Black Bavarian Lager.
- New Grist Gluten-Free Pilsner.
- Black Friday Imperial India-Style Black Ale.
- Paradocs Imperial Red IPA.
What is flow control on Perlick 650SS faucet?
The new flow control feature makes it easy to reduce foaming no matter the type of beer line you’re using; leaving you with a nice, tall glass of crystal clear beer. Constructed of 304 stainless steel to last a lifetime. Buy two or more 650SS faucets from MoreBeer! and receive free shipping in the lower 48 states!
Why does Perlick faucet have forward sealing design?
In the Perlick faucet, with its Forward Sealing design, beer only has to drain from the short 1″ nozzle section. This allows it to always operate smoothly (even when it was not cleaned between uses) and greatly reduces contamination!.
What can I use to soak my Perlick faucet?
Mix a small solution of PBW or BLC and hot water (approximately 140F), and let the faucet soak in for 30 minutes. Wearing rubber dish gloves remove the faucet and try moving the handle again.
