What does CL mean on Haier air conditioner?
Air Filter Cleaning Reminder. After 240 hours of use, the display window on the indoor unit will flash “CL.” This is a reminder to clean your filter. After 15 seconds, the unit will revert to its previous display. To reset the reminder, press the LED button.
Where is the reset button on a Haier portable air conditioner?
How to Reset a Haier AC
- Locate the “Reset” button in the bottom right corner of your air conditioner’s remote control.
- Unfold a paper clip or similar object and use it to push the “Reset” button.
- Wait while the unit resets itself.
- Follow the power cord from your air conditioner to the electrical outlet.
Why is my Haier portable AC not working?
If the portable air conditioner is running, but is not blowing cold air: Clean the filter. We recommend that the filter be cleaned once a week if possible. Confirm there is ample space around the unit, and that there is nothing obstructing the air flow around the intake.
How do I check my Haier error code?
Check if unit is plugged in. The plug may have come loose….Haier Air Conditioner Error Codes.
| Error Code | Description | Remark |
|---|---|---|
| F9 | Low pressure abnormal | Low pressure abnormal |
| F10 | No AC power supply | |
| F11 | Outdoor PCB EEPROM abnormal | Being electrified to test if the E2 check sum is correct or failure |
| F13 | Communication failure between outdoor PCB and module |
How do you fix E1 error on Haier Air Conditioner?
When you try to power on the Haier air conditioner, the model will beep and the error code E1 will flash momentarily and then appear on the screen. Unplugging the unit for 30 seconds and plugging it back in will reset the error code. If the code appears again, it is legit.
How do you fix a Haier Air conditioner that won’t turn on?
If your Haier air conditioner won’t turn on, you likely have a power issue. Check the electrical outlet to ensure the air conditioner is plugged in completely. Check the GFI or GFCI on the air conditioner plug to see if it’s tripped. While the unit is unplugged, hit the “reset” button on your plug and plug it back in.
How do I reset my Haier Air conditioner without a remote?
Press and hold the reset button next to the power cord for five seconds, then release your finger from the button. Wait ten minutes for the air conditioner to complete the reset process.
Why is my Haier portable AC blowing hot air?
Could be there’s just not enough air passing through the coils. Though a leak is also a possible cause. Also these are very inefficient by default as they use indoor air to cool the compressor which is then exhausted outside. This causes hot outside air to come replace it.
Why is my portable AC not blowing cold air?
The most common cause of a portable air conditioner not cooling a room is lack of airflow. If the air filter is dirty or clogged, there may not be enough air flowing over the evaporator coils and the coils can become too cold and frost over. This restricts airflow and a portable AC won’t cool the room.
Do I need to drain my Haier portable air conditioner?
In Cool mode: The portable air conditioner should not require water in the tank to be emptied. The unit is designed to continuously evaporate the water when in use. In Heat mode (on heat/cool models): You may need to empty the tank occasionally.
Why does my Haier Air Conditioner say E1?
Check All the Buttons: The E1 error code sometimes means that one of the control buttons is stuck, particularly on Haier models. Press all the buttons. If you find one that is sticking, free it, and the error code should disappear.
What are the error codes for Haier air conditioner?
E7 The internal module does not respond to commands from the remote control E8 Overload of the internal module motor F0 The temperature sensor in the room has disconnected F1 The internal module heat exchanger heat exchanger is turned off F2 The heat exchanger of the external module F3 The outdoor thermal sensor F4 The air flow sensor is off
Why do I need to Reset my Haier AC?
The company’s air conditioners come in a range of shapes and sizes to suit several types of home and office locations. Resetting your Haier air conditioner helps clear minor technical problems or restore the power supply after an electrical surge.
Where can I find the owner’s manual for Haier Appliances?
No results found for “”. Please try another search. The site navigation utilizes arrow, enter, escape, and space bar key commands. Left and right arrows move across top level links and expand / close menus in sub levels. Up and Down arrows will open main level menus and toggle through sub tier links.
How can I tell if my Haier air conditioner is broken?
Conditioners Haier also break down as however, and all household appliances, fault codes and possible errors in the split systems of this brand, you can easily identify by the table of faults, listed on our website.
