What is the grade of a socket head cap screw?
Typical bolts are supplied as grade 5.8, 8.8, or 10.9. Socket cap screws are often available in grade 12.9, meaning it has a UTS of 1200 MPa and will yield at 90% of this (1080 MPa).
What is the height of the head of a #10 socket head cap screw?
SOCKET HEAD CAP SCREW – METRIC
| Size | Diameter | Head Height |
|---|---|---|
| M8-1.25 | 8.00 | 8.00 |
| M10-1.50 | 10.00 | 10.00 |
| M12-1.75 | 12.00 | 12.00 |
| M14-2.0 | 14.00 | 14.00 |
What size screws 2×4?
The most common screw for joining two-by-fours is hardened steel, structural, No. 9, 2 1/2 inches long with a Phillips head. Other screw types appropriate for studs are specialized and may be harder to find and more expensive.
What diameter is a #6 screw?
American Screw Sizes
| THREAD DIAMETER | ||
|---|---|---|
| Size | Nearest Fraction | Millimeter |
| #6 | 9/64 | 3.3 |
| #8 | 5/32 | 4.2 |
| #10 | 3/16 | 4.8 |
Why is it called a socket head cap screw?
Socket head cap screws are typically used in machine parts, die fixturing, and clamping. Socket head cap screws with a full thread is another tall-headed, internally-driven high-strength fastener. The entire length of the shank is threaded, hence the name.
Are all socket head cap screws Grade 8?
Socket head cap screws are not grade designated as are hex head cap screws. A standard inch series socket head cap screw is 20% stronger than a Grade 8 hex head cap screw and 50% stronger than a Grade 5 hex cap screw.
What size bolt fits a 10mm socket?
Size Chart
| Bolt size | Size | Tolerance |
|---|---|---|
| M6 | 10mm | 10.04 |
| M7 | 11mm | 11.04 |
| 1/4″UNF | 7/16″ | 11.15 |
| 3/16″BSW | 11.34 |
What are the dimensions of a cap screw?
Cap Screws Notes: All linear dimensions in milli metres Dimensions generally to BS EN ISO 4762 BS 3643- 2 & BS 4168 (superceded) Nominal Thread. Hex Socket Size Body diameter and Head height Head Dia Soc. length Size Pitch Max Min Max Min J D /H A K M3 0.5 2.50 3.00 2.86 5.50 5.20 1.3 M4 0.70 3.00 4.00 3.82 7.00 6.64 2.00 M5 0.8 4.00 5.00 4.82
How long should a socket head cap screw be?
10% min (Applies to machined specimens at least 4D in length where D equals the nominal diameter of the screw.) 10% min (Applies to machined specimens at least 4D in length where D equals the nominal diameter of the screw.) 10% min (Applies to machined specimens at least 4D in length where D equals the nominal diameter of the screw.)
How big is a standard flat head screw?
Standard Length Increments Nominal Screw Diameter Nominal Screw Length Standard Length Increment #2 through 1 inch 1/8 to 1/4 1/16 1/4 to 1 inch 1/8 1 inch to 3 1/2 inches 1/4 3 ½ to 7 inches 1/2 Over 7 inches long 1 inch
What are the dimensions of a countersunk screw?
12.90 Countersunk Screws (Flat Head Screws) The dimensions are generally in accordance with BS EN ISO 10642:1998. This supersedes BS 4168-8. Nominal size Body Dia Thread Pitch
