What fluid does a velvet drive take?
Valvoline Dextron Mercron III automatic transmission fluid is the recommended fluid to use in most of Indmar’s transmissions. Use this ATF fluid in ZF Hurth,Velvet Drive, and Ski Vee V-drives where ATF is called for.
What is a Borg Warner velvet drive?
Borg-Warner’s (Velvet Drive’s) integral V-Drive marine transmission is a compact, self-contained unit that helps create extra cargo and cabin space by allowing you to move your engines further aft. TAD offers Rebuilt exchange Velvet Drive 71 & 72 Series Transmissions.
How much is a velvet drive transmission?
Between $600 and $1,200 on average, with some gears costing more, depending on the gear.
How much fluid does a velvet drive transmission take?
Uses oil type: GM Dexron III, Ford Mercon, Daimler-Benz 236.6 or any SAE 10 hydraulic oil that meets Allison Type C3, Caterpillar TO-2 or equivalent specifications. Oil capacity: 5 US quarts (4.9 liters).
How much fluid does a velvet drive transmission hold?
How much oil does a Velvet Drive hold?
How much does a velvet drive transmission weigh?
Borg Warner 71 Series
| Available Ratios | 1.0, 1.52, 1.91*, 2.10, 2.57, 2.92:1 |
|---|---|
| Input Shaft Spline Teeth | 26 |
| Input Shaft Rotation | Either Direction |
| Output Shaft Rotation | Same as Engine (except *) |
| Approxomate Dry Weight (Direct Drive) | 95 lbs. (49.4 kg) |
Are Velvet drive transmissions any good?
Velvet drives are one of the most reliable, robust and simple transmissions ever built. JI Case used a modified version with an automotive style torque convertor in their backhoe loaders for years. Paragon is good, but parts are getting harder to get, and I personally think they are not as robust. ZF makes a good unit.
How much fluid does a Velvet Drive hold?
Oil capacity: 5 US quarts (4.9 liters).
Which is the best oil for Borg Warner Velvet Drive?
Oil for Borg-Warner Velvet drive In-line hydraulic transmissions 72C (10-18). Which oil is the best? Professional lubrication advice – Kroon-Oil
How much oil does a velvet drive take?
Oil capacity: 5 US quarts (4.9 liters). Some high performance applications may result in foaming and leakage from transmission’s vent. Under these circumstances, Velvet-Drive suggest using oils meeting Allison Type C3 or Caterpillar TO-2 specifications.
How to check the transmission on a velvet drive boat?
Warm Oil Level Check With the engine at operating temperature, place the control lever in neutral and shut down the engine. Remove the dipstick by holding the base and turning the T-handle counter clockwise (see drawing). Wipe the dipstick clean and insert the dipstick fully into the transmission, withdraw, and read the fluid level.
